Search code examples
cfloating-pointlogarithm

Double equals 0 problem in C

I was implementing an algorithm to calculate natural logs in C.

double taylor_ln(int z) {
    double sum = 0.0;
    double tmp = 1.0;

    int i = 1;
    while(tmp != 0.0) {
        tmp = (1.0 / i) * (pow(((z - 1.0) / (z + 1.0)), i));
        printf("(1.0 / %d) * (pow(((%d - 1.0) / (%d + 1.0)), %d)) = %f\n", i, z, z, i, tmp);
        sum += tmp;
        i += 2;
    }

    return sum * 2;
}

As shown by the print statement, tmp does equal 0.0 eventually, however, the loop continues. What could be causing this?

I am on Fedora 14 amd64 and compiling with:

clang -lm -o taylor_ln taylor_ln.c

Example:

$ ./taylor_ln 2
(1.0 / 1) * (pow(((2 - 1.0) / (2 + 1.0)), 1)) = 0.333333
(1.0 / 3) * (pow(((2 - 1.0) / (2 + 1.0)), 3)) = 0.012346
(1.0 / 5) * (pow(((2 - 1.0) / (2 + 1.0)), 5)) = 0.000823
(1.0 / 7) * (pow(((2 - 1.0) / (2 + 1.0)), 7)) = 0.000065
(1.0 / 9) * (pow(((2 - 1.0) / (2 + 1.0)), 9)) = 0.000006
(1.0 / 11) * (pow(((2 - 1.0) / (2 + 1.0)), 11)) = 0.000001
(1.0 / 13) * (pow(((2 - 1.0) / (2 + 1.0)), 13)) = 0.000000
(1.0 / 15) * (pow(((2 - 1.0) / (2 + 1.0)), 15)) = 0.000000
(1.0 / 17) * (pow(((2 - 1.0) / (2 + 1.0)), 17)) = 0.000000
(1.0 / 19) * (pow(((2 - 1.0) / (2 + 1.0)), 19)) = 0.000000
(1.0 / 21) * (pow(((2 - 1.0) / (2 + 1.0)), 21)) = 0.000000
and so on...
Solution

  • The floating point comparison is exact, so 10^-10 is not the same as 0.0.

    Basically, you should be comparing against some tolerable difference, say 10^-7 based on the number of decimals you're writing out, that can be accomplished as:

    while(fabs(tmp) > 10e-7)