Search code examples
.netserial-portcommunicationlow-latency

Low Latency Serial Communications In .Net

I have been researching various third party libraries and approaches to low latency serial communications in .Net. I've read enough that I have now come full circle and know as little as I did when I started due to the variety of conflicting opinions.

For example, the functionality in the Framework was ruled out due to some convincing articles stating: "that the Microsoft provided solution has not been stable across framework versions and is lacking in functionality."

I have found articles bashing many of the older COM based libraries. I have found articles bashing the idea of a low latency .Net app as a whole due to garbage collection.

I have also read articles demonstrating how P/Invoking Windows API functionality for the purpose of low latency communication is unacceptable.

THIS RULES OUT JUST ABOUT ANY APPROACH I CAN THINK OF!

I would really appreciate some words from those with been there / done that experience. Ideally, I could locate a solid library / partner and not have to build the communications library myself. I have the following simple objectives:

  • Sustained low latency serial communication in C# / VB.Net
  • 32/64 bit
  • Well documented (if the solution is 3rd party)
  • Relatively unimpacted (communication and latency wise) by garbage collection .
  • Flexible (I have no idea what I will have to interface with in the future!) The only requirement that I have for certain is that I need to be able to interface with many different industrial devices such as RS485 based linear actuators, serial / microcontroller based gauges, and ModBus (also RS485) devices.

Any comments, ideas, thoughts or links to articles that may iron out my confusion are much appreciated!

Solution

  • I have a .NET Application that runs on a server with 16 COM ports, about 11 of which are currently connected to various devices, some RS485, many RS-232. (Diagram here: http://blog.abodit.com/2010/03/home-automation-block-diagram/). Most of these devices are running just 9600 baud, and most don't have very tight timing requirements. I have a thread per device handling receiving and while it runs at normal thread priority, all other non-communication threads run at a lower priority (as you should do for most background tasks anyway). I have had no issues with this setup. And, BTW it also plays music on three sound cards at the same time using high-priority threads from managed code and 1second DSound buffers, all without glitching.

    So how tight are your latency requirements, what baud rate and how many serial ports are you trying to serve? The buffer on your UART at most normal baud rates is more than sufficient for garbage collection and much more to delay taking the next byte off it.

    GC is not as evil as it is made out to be. On a properly prioritized threaded system with good management of object sizes and lifetimes and sufficient buffering (UARTS/Sound buffers etc.) it can perform very well. Microsoft is also continuously improving it and the .NET Framework 4 now provides background garbage collection. This feature replaces concurrent garbage collection in previous versions and provides better performance. See MSDN.