There is a fault when trying to connect to LAN8742A with STM32F407VG through RMII protocol...

rotation speed and direction of rotation using Encoder In stm32...

How to reorder the peripheral initialisation code that CubeID automatically generates...

When writing to flash on a STM32G031 Page erase enable occasionally causes hardfault...

STM32L072 USB Flash Drive...

Why is the interrupt not working as intended on STM32?...

function in C++ in CUBEide...

How does an array initialization causes hardfault error in STM32 Blue Pill?...

Problem displaying messages in serial port /dev/ttyACM0...

STM32 SPI slave sometimes hang on busy flag...

How to match CRC32 algorithms working on various data sizes...

TCP LwIP server does not respond to [FIN,ACK] from the TCP client?...

Recording Audio Using DFSDM on an STM microcontroller...

Can Read from I2C, but not Write...

STM32 IRQ Firing Too Early...

How to check size of SDRAM wizh STM32 and HAL...

Transmitting number as number through UART with STM32...

Why whould i call a pointer with no obvious function...

How to use and configure ADC of STM32F407G-Discovery with nanoFramework?...

stm32 as SPI slave, full-duplex transmitting via circular DMA buffer: changes to MISO buffer not (co...

STM32F4 Timers - Calculation of Period and Prescale, to generate 1 ms delay...

Re-program STM32F102 trouble...

SPI Communication On STM32F407VGT6...

How can I debug a HardFault on my STM32H743 when the recovered stack frame does not contain plausibl...

STM32 HAL SPI 16 bit Transmit...

STM32: how does the DMA save values of an ADC with 3 channels as half word into a buffer?...

How to convert data from LM73 temperature register to print out the answer?...

STM32F3 how to trigger ADC conversions on Timer and use circular DMA transfer...

I need to initialize and start the PLLI2S for MCO2 output at 50Mz for eth ref clock at boot, is ther...

How to extend reset time during MCU software reset? (STM32F427)...