How can Micro:bit act as a Bluetooth Low Energy (BLE) Central role?...

When the µc (nRF52840) goes into sleep mode, how can we save data that we want to use later whe...

How to keep an active MIDI BLE connection between an Arduino NANO 33 BLE (nRF52) and an iPad...

Zephyr RTOS (nRF Connect SDK): are k_msleep() and k_sleep() both non-blocking?...

How to run Zephyr Echo Client-Server sample using nrf52840dk & nrf52840dongle?...

Problem Flashing nrf52 chip using Openocd...

How can I casting void * to void **?...

nRF SDK: BLE GATT server and interrupts at the same time not working...

NRF52832 BLE device discovery issue...

How to initialize GPIOTE in NRF52?...

Achieving a 6-second period for a PWM Wave using nRF52 Series PWM Driver in C...

Unable to Communicate with SEN0491 Laser Ranging Sensor via Modbus using Seeed Xiao nRF52840 and Mod...

float to string in C++ using NRF MCU and Zephyr...

Starting point for building OpenThread applications using the nRF52840...

Where could macros be defined if there is only a definition in a header but the macro isnt doing any...

How to configure device type in bluethooth advertising package?...

Does Zephyr support sending non-IP traffic over 802.15.4?...

Web Bluetooth: Can't pair BLE device with Mobile Device with Live Server VS Code extension...

BLE not reading characteristic in reactive_ble...

How to access the child nodes in a device tree (DTS) in Zephyr using DT_FOREACH_CHILD...

Peripheral read vs RAM read + RAM write...

FreeRTOS can't set isr routine as critical region...

BLE<Bluetooth> : How to interpret nRF logs for BLE...

BLE/NRF52 - Connect two BLE-Centrals (Smartphone) with one Peripheral but receive the same notify si...

Arduino's micros() method is taking over 500 cycles to execute on Nano 33 BLE Sense...

Why am I getting errors after inserting functions to example code?...

AT-Commands from ESP32 to Fanstel BC805M (nRF52805M) not working...

HCI_UART on NRF52840, attaching the device on a Yocto based Linux SBC errors out saying "Can&#3...

Can we access same BLE Mesh network from one phone to other...

Ble data sending with nrf52...