Is there a way to figure out what version of Xilinx was used to create a bitfile from looking at the bitfile?
Is there a way to figure out what version of Xilinx was used to generate a bitfile just by looking in the bitfile? I've opened the bitfile in a hex editor, and only see the project name, date, and fpga model. See below.
Thanks!
Impossible, though this is not official: http://home.earthlink.net/~davesullins/software/bitinfo.html its README contains the following chunk.
Bitinfo is a simple utility that parses the header of a Xilinx bit file and outputs all the information that can be obtained from that header. This information includes the Xilinx FPGA the bit file was created for, the NCD file the bit file was created from, the creation date and time, and the bitstream length.
I guess you have to fallback on wildguess based on date/time. Good luck.
- How to implement HDMI pass-through on XILINX FPGA (Artix-7)
- Petalinux 2021.1 doesn't recognize the machine name for ZCU106
- NEC Infrared Transmission Protocol in C lanc on Xilinx
- Armv7 MMU on the ZYNQ-7000 not starting the virtualization
- Xilinx Vivado 2023 IP block design issue: Unable to connect output of RTL module to AXI GPIO output that is connected to LED
- Where to force xilinx ISE to use block-rams?
- Is CRC Calculation Faster on Xilinx Alveo U280 FPGA Using a Custom Algorithm or a Lookup Table?
- How to implement pipelined floating point accumulation in II=1 in Vitis/Vivado HLS?
- Timing simulation in Vivado giving an error
- Is it possible to tie ports high always high outside of top module?
- How to fix [Common 17-1293] error in Xilinx Vivado?
- How to initialize contents of inferred Block RAM (BRAM) in Verilog
- Implementing hardware that divides an 8 bit number by 3 (11) in binary
- Can SYSCLK be included in FPGA Xilinx vivado testbenches?
- Isim not running
- how to add python in xilinx vitis
- Timing closure problems in FIFO
- Xilinx Vivado schematic for if else statements
- difference between Xilinx solarflare scaleout onlod, solarflare onload, and solarflare TCPDirect?
- Inferring a True Dual Port RAM (Xilinx and Intel compatible) in Verilog
- 'case item is unreachable' in Vivado synthesis process
- Why does the Inferred Latch error occur during the synthesis process?
- What is the granularity of the AXI-ACE protocol?
- Restricting Verilog parameters
- Vitis HLS Pointer to Pointer is not supported for variable when initializing struct array
- Vitis PetaLinux build cant fetch required files while building an application project
- Address of a struct used to set MSI Base address, how does it work? (in Xilinx PCIe RC driver)
- How To Convert .bit file to .bin
- of_node_name_eq for device tree node label
- using xilinx cores in modelsim via .do file