microchipmplabmplab-5.45
Change link colors in output window of MPLAB X IDE v5.45
I'm using MPLAB X IDE v5.45 under Ubuntu and due to my color setup the links in the output window are almost unreadable:
I went through Tools > Options > Font & Colors but I didn't find anything useful. Please, would you help me to understand how to change the color of those links?
Solution
I am on MPLAB X v5.35 for Windows, but this should apply to your installation as well.
The colors of the output window can be changed in the "Options > Miscellaneous > Output" Tab.
- Can't see printf in MPLABX IDE anywhere... Why?
- How to accurately predict loop execution duration?
- Microchip MPLAB X IDE: configure and run a shared pre-build-step Bash script that runs in both Windows and Linux as part of the build process
- Verifying checksum for MCP3561/2/4R
- dsPic33E : RS485 Communication issue
- Copy struct to struct in C
- Is there a way to load a binary file as a const variable in C at compile time
- Missing binary operator before token "long"
- Self-written micros() for attiny13a works 10x slower
- Programming HEX using MPLAB X IPE v6.15, leads to PIC not starting
- dsPIC33 SPI AUDIO interrupt not firing
- Imprecise pulse width capture using Atmel SAM D51
- Microchip dsPIC33 Start all PWMs at same time
- How to change codeoffset?
- MPLAB X IDE 6.15 Assembly Toolchain
- MPLAB X project directory file colors - what do they mean
- dsPic Receive 11byte usart string
- Why does my hardware timer not increment the count using HAL libraries?
- How to make timer0 use a prescaler of 1:64 in 16 bit mode?
- How to get UART to work in PIC32 with correct clock frequency and baud rate?
- Bit-packing Problem in a Union (Register Mapping)
- ATMEGA4809 UART bootloader block gets corrupted randomly
- microchip exception handling
- How to remove unwanted data padding from custom sections on XC16
- Processor Architecture Registers vs. MCU Registers
- How to convert dsPIC33 HEX file to binary?
- Transmission and receiving of data through serial(in C)
- AVR - MCP4921, custom sinewave frequency
- Casting to union field yields to conversion warning
- How often should you send the bits of a serial dataframe so that it is recognised as such by RCREG SFR in MPLABX?