vhdllibusblattice-diamond
Llattice diamond programmer-tool
install Lattice Diamond 3.10 on my computer with Manjaro 17.1 and everything works correctly just because of a problem. The programming tool does not work, when I try to execute it I get a window with a message:
"can not load library: /usr/local/diamond/3.10_x64/bin/lin64/toolapps/libdvmapp.so: (libusb-0.1.so.4: the shared object file can not be opened: the file does not exist or the directory)"
already downloaded and I put the library in the corresponding directory but still does not let me run it
Any suggestions to solve it, I would appreciate it very much Thank you
Solution
I had to install the following libraries:
libusb 1.0.21-2 libgusb 0.2.11-1 libusb-compat 0.1.5-1 libusbmuxd 1.0.10+13dc724e70-1
And the programming tool works
- Verilog slice direction differs from VHDL
- My counter "4-digit BCD Counter" does not work well!
- With the MESI protocol, a write hit also stalls the processor, right?
- Vectors multiplication
- Compiling VHDL file with ```ghdl -a``` encountered error ```ghdl:error: installation problem: ghdl1-llvm not found```
- VHDL if statement precedence
- Generate read-address and write address for zig-zag scan of NxN matrix
- Where to force xilinx ISE to use block-rams?
- FPGA efficient (a)synchronous resets
- Can an embedded configuration be used for an instance inside a generate?
- Weak 'H', Pullup on inout bidirectional signal in simulation
- VHDL Coding .. conversion from integer to bit_vector
- Viterbi Decoder VHDL project
- Timing simulation in Vivado giving an error
- When should I use a function over a procedure?
- VHDL-2008 to_01 conversion
- Uninitialized signal value for unknown reason
- Representing 2 binary digits in hex for vhdl
- Convert enum type to std_logic_vector VHDL
- Synthesis ERROR: [Synth 8-27] else clause after check for clock not supported
- Simulation Time in Concurrent VHDL Procedures
- VHDL when else interpretation
- Finding source of PS2 keyboard delay
- Elegant Way To Compress If/Elsif Statements into Single For Loop Statement in VHDL
- VHDL Hierarchical Reference within/to Generate Statement(s)
- How do I install GTKWave on Windows?
- In VHDL, I have an error when slicing an unsigned result
- How to get real type ratio between two time values?
- Vivado Error: [DRC MDRV-1] Multiple Driver Nets
- How do i add a "for" loop in VHDL