I'm working on a card reader now. I want to take data from the card. I took uid. I want to take encrypted data. So I want to enter the secure mode and start session. I did something. I send a command apdu to start session but every time return unknown exception 0x1f here is the code.
TerminalFactory factory = TerminalFactory.getDefault();
List<CardTerminal> terminals = factory.terminals().list();
terminal = terminals.get(0);
card = terminal.connect("T=1");
CardChannel channel = card.getBasicChannel();
byte[] c1 = { (byte) 0x80, (byte) 0x72, (byte) 0x80, (byte) 0x00, (byte) 0x18, (byte) 0x5c, (byte) 0xc5,
(byte) 0x0a, (byte) 0xa2, (byte) 0x5b, (byte) 0x38, (byte) 0x7f, (byte) 0x81, (byte) 0x3a, (byte) 0x3d,
(byte) 0x1a, (byte) 0x88, (byte) 0x7d, (byte) 0x26, (byte) 0xfc, (byte) 0x2b, (byte) 0xa8, (byte) 0xa7,
(byte) 0xdd, (byte) 0xdc, (byte) 0x71, (byte) 0xe0, (byte) 0xf3, (byte) 0xc6 };
ResponseAPDU response = channel.transmit(new CommandAPDU(0xFF, 0x00,0x00,0x00,c1,5,24));
This code returns me 6a81( it means function not supported),
if I send directly start session command(84 72 00 00) this time returns unknown exception.
Please help me. You don't have to find the error in code. Tell me How Can I Start Session in a Smart Card. I use HID OMNİKEY 5021 CL.
Exception in thread "main" javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x1f
at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:219)
at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:90)
at CardReader.GetUID.getUID(GetUID.java:48)
at CardReader.GetUID.main(GetUID.java:86)
I found the problem. The problem is byte types .net and java. C# byte type between 0 and 255 but java byte type -127 and +128. So if I send a higher than 127 value to java, card interpret like minus value.