Straight lined scatter over marked scatter plot
I'm trying to make a simple scatter plot in Excel. One variable are field measures of river flow. The other one is the fitted rating curve (done externally). I draw the field measures as marked scatter plot. For the rating curve I created a column with the water level at each centimeter and the respective water flow calculated with the curve equation. With this pair (water level, water flow) I have added a second series and changed from marked scatter to straight lined scatter plot.
The problem is that I need to see the rating curve over the measures plot. I had changed the plot order but didn't work. The marked plot is always over the lined one.
Any suggestion!?
I have not had success with changing series order causing scatter data to appear behind a line. Even though the order of the Legend will change, the plot order does not appear to be affected.
In order to get your line to appear in front of the scatter data, you will need to put the line on the Secondary Axis, then make sure your min/max values for the secondary axis are the same as the primary.
If you don't want to see the secondary axis set the Label Position to None.
- Constrain a Specman list so it doesn't have identical values in consecutive elements
- How to type cast a list of uint to a list of vr_ahb_data in Specman?
- Static fields/methods in e
- What is the difference between deep_copy and gen keeping in Specman?
- Specman UVM: What is the difference between write_reg { .field == 2;}; and write_reg_fields?
- Does Specman support optional parameters to a method?
- Specman e: When colon equal sign ":=" should be used?
- Specman e: Is there a way to know how many values there is in an enumerated type?
- Specman e error: No match for file when using "for each line in file"
- How to run e file one by one? Not in parallel test
- Specman/e constraint (for each in) iteration
- Specman e: How driver's items queue can be locked from a sequence?
- Specman e: How to print variable's address?
- Specman e: "keep type .. is a" fails to refine the type of a field
- Specman soft select on variable, decimal vs. hexadecimal values
- Specman e: How to print a pointer to a struct?
- Specman e: Is there a way to print unit instance name?
- Specman e: simultaneous events error
- Specman e coverage: ignored values appear in the coverage statistics
- Specman e: How a sequence should be started when gen_and_start_main constrained to FALSE?
- Specman/e list of lists (multidimensional array)
- Does Specman e have struct constructor?
- Specman e: How the predefined sequence.item should be used?
- Specman e: define-as-computed macro error
- Specman e UVM: Why to inherit from uvm_* units?
- Specman e: A sequence drives its BFM also its MAIN was not defined in a test
- e HVL (IEEE 1647): expect expression fails unexpectedly
- Specman e subtyping: How to refer to FALSE value of conditional field in when/extend subtyping?
- e HVL (IEEE 1647): How to set 'X' value?
- Difference between declaring an event that is sensitive to a simple_port value and event_port