I recently answered a SO-question about using -lt or -gt with strings. My answer was based on something I've read earlier which said that -lt compares one char from each string at a time until a ASCII-value is not equal to the other. At that point the result (lower/equal/greater) decides. By that logic, "Less" -lt "less" should return True because L has a lower ASCII-byte-value than l, but it doesn't:
[System.Text.Encoding]::ASCII.GetBytes("Less".ToCharArray())
76
101
115
115
[System.Text.Encoding]::ASCII.GetBytes("less".ToCharArray())
108
101
115
115
"Less" -lt "less"
False
It seems that I may have been missing a crucial piece: the test is case-insensitive
#L has a lower ASCII-value than l. PS doesn't care. They're equal
"Less" -le "less"
True
#The last s has a lower ASCII-value than t. PS cares.
"Less" -lt "lest"
True
#T has a lower ASCII-value than t. PS doesn't care
"LesT" -lt "lest"
False
#Again PS doesn't care. They're equal
"LesT" -le "lest"
True
I then tried to test char vs single-character-string:
[int][char]"L"
76
[int][char]"l"
108
#Using string it's case-insensitive. L = l
"L" -lt "l"
False
"L" -le "l"
True
"L" -gt "l"
False
#Using chars it's case-sensitive! L < l
([char]"L") -lt ([char]"l")
True
([char]"L") -gt ([char]"l")
False
For comparison, I tried to use the case-sensitive less-than operator, but it says L > l which is the opposite of what -lt returned for chars.
"L" -clt "l"
False
"l" -clt "L"
True
How does the comparison work, because it clearly isn't by using ASCII-value and why does it behave differently for chars vs. strings?
A big thank-you to PetSerAl for all his invaluable input.
tl; dr:
-lt and -gt compare [char] instances numerically by Unicode codepoint.
-ilt, -clt, -igt, -cgt - even though they only make sense with string operands, but that's a quirk in the PowerShell language itself (see bottom).-eq (and its alias -ieq), by contrast, compare [char] instances case-insensitively, which is typically, but not necessarily like a case-insensitive string comparison (-ceq again compares strictly numerically).
-eq/-ieq ultimately also compares numerically, but first converts the operands to their uppercase equivalents using the invariant culture; as a result, this comparison is not fully equivalent to PowerShell's string comparison, which additionally recognizes so-called compatible sequences (distinct characters or even sequences considered to have the same meaning; see Unicode equivalence) as equal. -eq / -ieq with [char] operands, and does so in a manner that is almost, but not quite the same as case-insensitive string comparison.This distinction leads to counter-intuitive behavior such as [char] 'A' -eq [char] 'a' and [char] 'A' -lt [char] 'a' both returning $true.
To be safe:
[int] if you want numeric (Unicode codepoint) comparison.[string] if you want string comparison. For background information, read on.
PowerShell's usually helpful operator overloading can be tricky at times.
Note that in a numeric context (whether implicit or explicit), PowerShell treats characters ([char] ([System.Char]) instances) numerically, by their Unicode codepoint (not ASCII).
[char] 'A' -eq 65 # $true, in the 'Basic Latin' Unicode range, which coincides with ASCII
[char] 'Ā' -eq 256 # $true; 0x100, in the 'Latin-1 Supplement' Unicode range
What makes [char] unusual is that its instances are compared to each other numerically as-is, by Unicode codepoint, EXCEPT with -eq/-ieq.
ceq, -lt, and -gt compare directly by Unicode codepoints, and - counter-intuitively - so do -ilt, -clt, -igt and -cgt:[char] 'A' -lt [char] 'a' # $true; Unicode codepoint 65 ('A') is less than 97 ('a')
-eq (and its alias -ieq) first transforms the characters to uppercase, then compares the resulting Unicode codepoints:[char] 'A' -eq [char] 'a' # !! ALSO $true; equivalent of 65 -eq 65
It's worth reflecting on this Buddhist turn: this and that: in the world of PowerShell, character 'A' is both less than and equal to 'a', depending on how you compare.
Also, directly or indirectly - after transformation to uppercase - comparing Unicode codepoints is NOT the same as comparing them as strings, because PowerShell's string comparison additionally recognizes so-called compatible sequences, where characters (or even character sequences) are considered "the same" if they have the same meaning (see Unicode equivalence); e.g.:
# Distinct Unicode characters U+2126 (Ohm Sign) and U+03A9 Greek Capital Letter Omega)
# ARE recognized as the "same thing" in a *string* comparison:
"Ω" -ceq "Ω" # $true, despite having distinct Unicode codepoints
# -eq/ieq: with [char], by only applying transformation to uppercase, the results
# are still different codepoints, which - compared numerically - are NOT equal:
[char] 'Ω' -eq [char] 'Ω' # $false: uppercased codepoints differ
# -ceq always applies direct codepoint comparison.
[char] 'Ω' -ceq [char] 'Ω' # $false: codepoints differ
Note that use of prefixes i or c to explicitly specify case-matching behavior is NOT sufficient to force string comparison, even though conceptually operators such as -ceq, -ieq, -clt, -ilt, -cgt, -igt only make sense with strings.
Effectively, the i and c prefixes are simply ignored when applied to -lt and -gt while comparing [char] operands; as it turns out (unlike what I originally thought), this is a general PowerShell pitfall - see below for an explanation.
As an aside: -lt and -gt logic in string comparison is not numeric, but based on collation order (a human-centric way of ordering independent of codepoints / byte values), which in .NET terms is controlled by cultures (either by default by the one currently in effect, or by passing a culture parameter to methods).
As @PetSerAl demonstrates in a comment (and unlike what I originally claimed), PS string comparisons use the invariant culture, not the current culture, so their behavior is the same, irrespective of what culture is the current one.
Behind the scenes:
As @PetserAl explains in the comments, PowerShell's parsing doesn't distinguish between the base form of an operator its i-prefixed form; e.g., both -lt and -ilt are translated to the same value, Ilt.
Thus, Powershell cannot implement differing behavior for -lt vs. -ilt, -gt vs. igt, ..., because it treats them the same at the syntax level.
This leads to somewhat counter-intuitive behavior in that operator prefixes are effectively ignored when comparing data types where case-sensitivity has no meaning - as opposed to getting coerced to strings, as one might expect; e.g.:
"10" -cgt "2" # $false, because "2" comes after "1" in the collation order
10 -cgt 2 # !! $true; *numeric* comparison still happens; the `c` is ignored.
In the latter case I would have expected the use of -cgt to coerce the operands to strings, given that case-sensitive comparison is only a meaningful concept in string comparison, but that is NOT how it works.
If you want to dig deeper into how PowerShell operates, see @PetSerAl's comments below.