Vhdl-Code testbench why are there no ports declared

Why are there no ports declared in VHDL-code testbench?

Solution

A testbench is a closed system. All inputs to the design under test (DUT) are driven by the testbench. All outputs from the design under test can be observed by the testbench. Hence, the testbench has no inputs or outputs.

Error when trying to read binary file in VHDL
Mismatch between behavioral simulation and post-synthesis functional simulation in vivado
Vivado VHDL: attribute 'stable not implemented
What is the utility of a "clock'event" if the sensitivity list has a single signal and is tested at 1?
Why am I not able to write to/read from custom AXI lite peripheral's registers
Verilog slice direction differs from VHDL
My counter "4-digit BCD Counter" does not work well!
With the MESI protocol, a write hit also stalls the processor, right?
Compiling VHDL file with ```ghdl -a``` encountered error ```ghdl:error: installation problem: ghdl1-llvm not found```
VHDL if statement precedence
Generate read-address and write address for zig-zag scan of NxN matrix
Where to force xilinx ISE to use block-rams?
FPGA efficient (a)synchronous resets
Can an embedded configuration be used for an instance inside a generate?
Weak 'H', Pullup on inout bidirectional signal in simulation
VHDL Coding .. conversion from integer to bit_vector
Viterbi Decoder VHDL project
Timing simulation in Vivado giving an error
When should I use a function over a procedure?
VHDL-2008 to_01 conversion
Uninitialized signal value for unknown reason
Representing 2 binary digits in hex for vhdl
Convert enum type to std_logic_vector VHDL
Synthesis ERROR: [Synth 8-27] else clause after check for clock not supported
Simulation Time in Concurrent VHDL Procedures
VHDL when else interpretation
Finding source of PS2 keyboard delay
Elegant Way To Compress If/Elsif Statements into Single For Loop Statement in VHDL
VHDL Hierarchical Reference within/to Generate Statement(s)
How do I install GTKWave on Windows?