intel-fpganios
How to find system library properties in Nios 2 IDE v12?
I'm trying to make a project according to the spec but the dialogs seem to have changed completely in version 12.
I don't nearly get similar dialogs in Nios 2 IDE v12.
This is what I search:
This is what I get, and nothing leads to a dialog like in the spec:
How do I find the system library properties in version 12?
Solution
What if you select File->New->Project ? I'm on NIOS2IDE 12.0 and that seems to work.
Next dialog shows this, where I specify the location of the already existent BSP.
Then select Your BSP (left column, right click)->NIOS2->BSP Editor
- How to add IP Libraries to Questa with Cocotb?
- Verilog module always going to default case when assigning value to input
- Quartus-FPGA: Disable Path Optimization
- What is "strictly control signal" and Why is its input unconstrained?
- Error (10170): Verilog HDL syntax error (59) near text: "posedge"; expecting an operand
- Analyzing synchronizer MTBF in Quartus
- Inferring a True Dual Port RAM (Xilinx and Intel compatible) in Verilog
- How to fix libXft.so.2: cannot open shared object file when simulating hardware in Quartus 20.1 running on Pop_OS 20.04
- How to read data from FPGA on HPS side
- Timing diagram of convst. signal of ADC (ads8556)
- Error: object on left-hand side of assignment must have a net type
- How do I concatenate parameters and integers?
- View report.html after DPC++ compilation for FPGA on DevCloud connected with Jupyter
- Output 'X' instead of '1' or '0' in VHDL
- "Serial Loader Device is missing" during Convert Programming File with Quartus Prime
- How to connect module to module in Verilog?
- How to correctly calculate the frequency of the device in Timing Analyzer, Intel Quartus
- Verilog - output exuals to XXXXXXXX
- ModelSim-Altera error
- How can I prevent that DSP blocks are synthesized away if they are not connected to a top level output?
- How do I load an FPGA's Registers with Data?
- Altera Quartus Error (12007): Top-level design entity "alt_ex_1" is undefined
- NIOSII with Remote System Update IP Core for Cyclone10LP does not execute
- Intel OpenCL SDK for FPGA compile kernel for emulation with aoc command gives linker error
- Can't compile my system in Qsys
- Verilog/SystemVerilog: passing a slice of an unpacked array to a module
- OpenCL FPGA: Kernel Execution of 2 copies of same kernel is not being made in parallel. In addition to that, there is also idle time in between them
- Trying to blink LED in Verilog
- Getting nan values from OpenCL FFT kernel on FPGA
- Best Way to declare a LUT in OpenCL (Intel FPGA)