Initializing Xbee S1 by an Arduino mini pro...

ftdi_usb_open() returns -8 on Linux, but the same code is working on Mac...

USB: why USB devices the modules automatically loaded...

How to get extended port information when enumerating ports using Windows API...

/dev/ttyUSB latency of 15ms...

Python for .NET: How to provide a variable of special type (FTDI.FT_DEVICE_INFO_NODE[]) as method pa...

How Serial Port Loopback Test work internally/underneath?...

Is a FTDI USB to RS232 better than a real RS232 COM port?...

Using GPIOs from the C232HM FTDI...

Using FTDI D2XX drivers with Python from Raspberry Pi on raspbian soft-float...

Cannot Read Bytes from an FTDI Serial I2C to Android Eclipse Java app...

FTDI D2XX API in C works on command-line console but always returns zero in application which is bui...

Problem Reading Data using FTDI D2xx library...

Serial port basestream gives partial / scrambled / duplicated data...

Delay in between uart packets sent from another device to PC using FTDI chip...

pylibftdi Device.read skips some bytes...

How to communicate with a spi slave connected via FTDI USB correctly through the pyftdi lib?...

Cannot communicate with FTDI device via pylibftdi with specified device_id...

Reading and writing to serial port using FTDI D2XX drivers with Visual Basic 6...

RS485: Inappropriate ioctl for device...

How can I communicate from node js to ftdi? (without ftdi module)...

FTDI FT232R force flushing FIFO...

Bypassing powered on FTDI. Connect directly to RX/TX pins to drive externally...

ftd2xx.open creates always the device status FT_INVALID_HANDLE...

Does the FTDI D2XX driver work on Ras Pi 3 b+ running Windows 10 IoT v.10.0.17661?...

How to use the FTDI D2XX library on OSX?...

udev rules for FTDI device are not working in VMware Ubuntu 16.04...

FT4222 device info correct under Windows, incorrect under Linux?...

Reading USB with ioctl fails for "value too large for defined data type"...

Send data to Arduino at any time...