of_node_name_eq for device tree node label...

What's the difference between 'timebase-frequency' and 'clock-frequency' for Lin...

imx8mplus dev board yocto image psplash shows dual image on mipi dsi touch display...

SPI without CS pins configured (BeagleBone Black)...

Add two TFT displays to device tree...

When should we use device tree overlay over multiple device tree blob?...

Configure Yocto image on CM4 to work with Official Raspberry Pi Display...

Kernel-space: can .probe be called simultaneously/concurrently?...

user space and device tree recipe combined in yocto build...

invalid choice: 'kernel_add_dts' in yocto build...

What is the value inside pinctrl...

Does loadable kernel module(LVM) also need device tree?...

Yocto ad7768-1 device driver not creating device file...

To configure pin define in a SoC, what's different between doing it in U-Boot and Linux Device T...

Cannot get device binding in Zephyr...

device-tree overlay: fragment numbers...

yocto - create a meta layer with a bbappend file adding dts flle to raspberry pi kernel...

Configuring Pins Mode Beaglebone...

Simple GPIO Device Tree Example for Beaglebone Black Deb 10.3...

Device Tree Configuration for PTN5110 with an iMX6UL and Kernel 5.15...

How to add device tree support and DMA assignement to character device module?...

GPIO controller settings in DTS...

How is the 'data' field provided by the device tree (for platform devce case)?...

how to set max-functions in pcie device tree? (about the syntax "max-functions = /bits/ 8 <8...

STM32MP1 linux IRQs & EXTI controller config in DTS file...

Cannot reserve memory on Petalinux2020.2?...

Why my program gets wrong address-cell/size-cell values from Device tree?...

Incorrect values for #address-cells and #size-cells in Device Tree...

How do I embed a device tree blob, (dtb), in a linux kernel?...

How to use gpio from device tree in a i2c_driver?...