How to consider letter by letter of a string and compare them with if functions?...

AVR128DB28 communication with SD card over SPI failed...

Register access suppresses otherwise possible optimization (avr-gcc)...

libgcc subroutines documentation for avr-gcc...

How can I bind a variable to an unused AVR I/O register using avr-gcc?...

type of 'USART0_RX_vect' defaults to 'int' [enabled by default]...

Why main() function gets executed again and again only when interrupt- ISR(ADC_vect) gets executed?...

AVR Timer Overflow ISR not running...

C++ optimization comparing inline classes and functions doesn't seem good enough...

ATTiny1606 Timer TCA0 interrupt not triggering...

Problems setting up an AVR MCU programmer in Eclipse 2024-03...

How can I get "avr-unknown-gnu-atmega328" target working?...

AVR bitwise C operations...

Multiple programs on AVR atmega...

Arduino LED blink 3 time without reasons...

ATmega328P EEPROM not writing...

Casting a constant to a pointer increases .data size by 1000 bytes...

Shell / Makefile Linker...

Arduino UNO Hangs on USART0 RX ISR...

Error "Relative branch out of reach" in avr...

Why is the ATmega32U4 not running the code directly?...

AVR Assembler in Linux...

Multiply two 8 bit number that gives 16bit number as result, with 8bit register and only add instruc...

Why are functions executed in the order they are defined and not in the order they are called from t...

Assembly 8x8 four quadrant multiply algorithm...

AVR: Creating and understanding minimum startup code and linker scripts from scratch...

figure out flash access AVR ATmega2560...

Why AVR-GCC compilers append a "clr r1" line after multiplication?...

AVR studio Error "Got 0xc0, expected 0x00"...

Using timer0 to measure execution time on atmega2560...