Search code examples
bashmacosarmqemuvmdk

qemu-system-x86_64 No bootable device. ARM M2 processor. mit6.858

I'm learning the mit6.858. In Lab1, I need to set up the lab environment on my M2 Mac using qemu (version 7.2.0 installed by homebrew).

I follow the instruction of the lab hints and run the course VM Image with this shell scripts:

#!/bin/bash

if ! command -v qemu-system-x86_64 > /dev/null; then
    echo "You do not have QEMU installed."
    echo "If you are on a Linux system, install QEMU and try again."
    echo "Otherwise, follow the lab instructions for your OS instead of using this script."
    exit
fi

# can we use the -nic option?
version=$(qemu-system-x86_64 --version \
    | grep 'QEMU emulator version' \
    | sed 's/QEMU emulator version \([0-9]\)\.\([0-9]\).*/\1.\2/')
major=$(echo "$version" | cut -d. -f1)
minor=$(echo "$version" | cut -d. -f2)

net=()
if (( major > 2 || major == 2 && minor >= 12 )); then
    net=("-nic" "user,ipv6=off,model=virtio,hostfwd=tcp:127.0.0.1:2222-:2222,hostfwd=tcp:127.0.0.1:8080-:8080,hostfwd=tcp:127.0.0.1:8888-:8888")
else
    net=("-netdev" "user,id=n1,ipv6=off,hostfwd=tcp:127.0.0.1:2222-:2222,hostfwd=tcp:127.0.0.1:8080-:8080,hostfwd=tcp:127.0.0.1:8888-:8888" "-device" "virtio-net,netdev=n1")
fi

qemu-system-x86_64 \
    -m 2048 \
    -nographic -serial mon:stdio \
    "$@" \
    # -enable-kvm \
    "${net[@]}" \
    6.858-x86_64-v22.vmdk

But I got this output:

SeaBIOS (version rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org)


iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+7EFD11A0+7EF311A0 CA00
                                                                               


Booting from Hard Disk...
Boot failed: could not read the boot disk

Booting from Floppy...
Boot failed: could not read the boot disk

Booting from DVD/CD...
Boot failed: Could not read from CDROM (code 0003)
Booting from ROM...
iPXE (PCI 00:03.0) starting execution...ok
iPXE initialising devices...ok



iPXE 1.20.1+ (g4bd0) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT

net0: 52:54:00:12:34:56 using 82540em on 0000:00:03.0 (open)
  [Link:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net0 52:54:00:12:34:56)...... ok
net0: 10.0.2.15/255.255.255.0 gw 10.0.2.2
Nothing to boot: No such file or directory (http://ipxe.org/2d03e13b)
No more network devices

No bootable device.

When I type ctrlA+X to quit, I got another lines of output.

QEMU: Terminated
./6.858-x86_64-v22.sh: line 30: -nic: command not found

My homebrew installation is correct. I'd like to know how to start the course VM correctly on M2 mac.

Solution

  • The clues

    One thing you don't explicitly mention in your question is that you modified the script, attempting to comment out this line:

        # -enable-kvm \

    (The reason to remove that flag is because kvm is not available on macOS hosts, and the alternative, hvf, is not available when using binary translation to run an x86-64 VM on an arm64 host CPU.)

    Another clue to the problem is this error:

    ./6.858-x86_64-v22.sh: line 30: -nic: command not found

    What's happened here is that the backslashes (\) at the end of each of these lines in the original script turn the multi-line block into a single line:

    qemu-system-x86_64 \
    -m 2048 \
    -nographic -serial mon:stdio \
    "$@" \
    -enable-kvm \
    "${net[@]}" \
    6.858-x86_64-v22.vmdk

    Unfortunately, when commenting a line with #, bash ignores any backslash at the end of the line - this interrupts and splits the multi-line command.

    This means that your networking and disk image command line options are not making it into the qemu command line, which in turn is why it can't find the virtual disk image. The -nic error comes from treating the following as a new command:

        "${net[@]}" \
    6.858-x86_64-v22.vmdk

    Solution:

    Don't comment out the flag -enable-kvm \ in place: either remove the line entirely, or move it out of the command and comment it out there.