Search code examples
azureazure-virtual-networkazure-vpn

Azure Point-to-Site : RDP

I configured a P2S VPN and was able to access the Jump-box in the Hub Virtual Network via a private IP address.

enter image description here

Using the same P2S VPN, I cannot reach the VM in the Production subscription while I could RDP into the VM from the Jumb-box directly.

enter image description here

RDP is allowed at the NSG level

enter image description here

RDP is allowed at the firewall level

enter image description here

Hub-to-Spoke Peering is done

enter image description here

Spoke-to-hub Peering is done

enter image description here

10.0.0.68 is the firewall IP

Routing table is configured as shown below

enter image description here

and

enter image description here

I feel that this is more of a Firewall / Route Table issue

Solution

  • I tried to reproduce the same issue in my environment and got the below results

    Remote desktop has the feature to connect the other computers to resolve the issue find the below steps

    Change the firewall settings

    Click on Windows button and search "allow-app through windows firewall" and changed the settings as mentioned in the screenshot

    enter image description here

    2). Allow the remote desktop connection

    Click the windows button and search for "allow remote desktop connection"

    enter image description here

    3). Adding the RDGCLIENT transport key Press windows + R and type regedit and enter

    enter image description here

    4). Changing the network properties press windows + I and network and properties and change the network status is to Private

    Note: If all the settings to be properly connected and if still not able to connect, for particular subscription we may have the restrictions to connect the RDP, Contact the admin department