I have a dockerimage based on alpine, in which want to enable ssh connection (i use this image for local development, have installed php and other stuff on top)
Dockerfile
FROM alpine:3.13
# utils
RUN apk add openssh \
&& apk add nano
#Enable ssh login
RUN apk add openrc && rc-update add sshd \
&& sed -i '/^#Port 22/s/^#//' /etc/ssh/sshd_config \
&& sed -i '/^#PasswordAuthentication/s/^#//' /etc/ssh/sshd_config \
&& sed -i '/^#PermitEmptyPasswords no/s/^#PermitEmptyPasswords no/PermitEmptyPasswords yes/' /etc/ssh/sshd_config \
&& sed -i '/^#PermitRootLogin prohibit-password/s/^#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config \
&& echo "root:Docker!" | chpasswd
I try from guest host to connect like below and get error (port 2022 is correct i port forward in docker-compose 22 to that one):
root@vagrant:/docker# ssh -vvv root@localhost -p 2022
OpenSSH_7.2p2 Ubuntu-4ubuntu2.8, OpenSSL 1.0.2g 1 Mar 2016
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: resolving "localhost" port 2022
debug2: ssh_connect_direct: needpriv 0
debug1: Connecting to localhost [::1] port 2022.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: key_load_public: No such file or directory
debug1: identity file /root/.ssh/id_rsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /root/.ssh/id_rsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /root/.ssh/id_dsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /root/.ssh/id_dsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /root/.ssh/id_ecdsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /root/.ssh/id_ecdsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /root/.ssh/id_ed25519 type -1
debug1: key_load_public: No such file or directory
debug1: identity file /root/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_7.2p2 Ubuntu-4ubuntu2.8
ssh_exchange_identification: Connection closed by remote host
I had done similar setup with ubuntu base image worked fine, now am migrating to alpine but cannot understand why is not working.
sshd config inside docker container at /etc/ssh/sshd_config:
# $OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/bin:/usr/bin:/sbin:/usr/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none
# Logging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
PermitEmptyPasswords yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
# Feel free to re-enable these if your use case requires them.
AllowTcpForwarding no
GatewayPorts no
X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
sshd isn't running in your container. If you create a file called entrypoint.sh in your directory containing this
#!/bin/sh
ssh-keygen -A
/usr/sbin/sshd -D -e
and change your Dockerfile to
FROM alpine:3.13
# utils
RUN apk add openssh \
&& apk add nano
#Enable ssh login
RUN apk add openrc && rc-update add sshd \
&& sed -i '/^#Port 22/s/^#//' /etc/ssh/sshd_config \
&& sed -i '/^#PasswordAuthentication/s/^#//' /etc/ssh/sshd_config \
&& sed -i '/^#PermitEmptyPasswords no/s/^#PermitEmptyPasswords no/PermitEmptyPasswords yes/' /etc/ssh/sshd_config \
&& sed -i '/^#PermitRootLogin prohibit-password/s/^#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config \
&& echo "root:Docker!" | chpasswd
COPY entrypoint.sh /entrypoint.sh
ENTRYPOINT ["/entrypoint.sh"]
Then it'll work