I been looking everywhere online for this exact configuration but can't find much.
I want to program my AtMega328p MCU (its on a breadboard) using Python from my Raspberry Pi 4 but I am not sure how to check if communication is going on between them? I have the MISO, MOSI, SCLK, and CE0 pins from the Pi connected to the MISO, MOSI, SCK, SS pins on the AtMega328p respectively.
I understand I have to use SPI communication, however how can I exactly send data from the Raspberry Pi to the MCU to ensure there is communication between the two? Maybe some code to send to the MCU and receive it back? I been using the SPI Dev Python libraries but can't find much info on it. Thank you in advance!!
To load code onto the AVR (program it), you want to use existing software like avrdude
that already speaks the AVR ISP protocol. avrdude
already has support for using the RPi SPI headers - just use the linuxspi
programmer type.
Here's an article by the author that explains it (although there are probably more recent articles if you search around) http://kevincuzner.com/2013/05/27/raspberry-pi-as-an-avr-programmer/
Is there a reason you want to do this from Python specifically? Or are you referring to communicating between the uC firmware and some Python code on the Pi?