Search code examples
printinglabelzpl

Zebra Label zpl not showing completely in physical but yes virtual print

Hello I am trying to print a zpl label, it works virtually fine for me but they have sent me physical tests of the label from the printer and it does not print 3 letters that are to the right. Attached image.

any suggestions?

Code Label ZPL:

"^XA^DFR:FOR_ALV.ZPL^FS
^PRC
^LH0,0^FS
^LL504
^MD8
^MMT
^MNY
^LH0,0^FS
^FO48,8^A0N,56,49^CI13^FR^FN17^FS
^FO160,8^A0N,56,49^CI13^FR^FN1^FS
^FO480,8^A0N,75,49^CI13^FR^FN16^FS
^FO48,63^A0N,56,49^CI13^FR^FN10^FS
^FO350,63^A0N,56,49^CI13^FR^FN15^FS
^FO550,83^A0N,32,41^CI13^FR^FN8^FS
^FO48,130^A0N,24,36^CI13^FR^FN2^FS
^FO48,155^A0N,24,36^CI13^FR^FN3^FS
^FO48,180^A0N,24,36^CI13^FR^FN4^FS
^FO48,205^A0N,24,36^CI13^FR^FN5^FS
^FO48,230^A0N,32,36^CI13^FR^FN6^FS
^FO48,260^A0N,32,25^CI13^FR^FN9^FS
^FO178,260^A0N,32,25^CI13^FR^FN7^FS
^FO290,260^A0N,24,36^CI13^FR^FN12^FS
^FO400,260^A0N,32,41^CI13^FR^FN14^FS
^FO500,260^A0N,32,41^CI13^FR^FN13^FS
^FO030,305^A0N,29,36^CI13^FR^FDBUSINESSS.A. C.V.^FS
^FO030,335^A0N,29,36^CI13^FR^FDNAME OTHER^FS
^FO030,360^A0N,33,36^CI13^FR^FDwww.webpage.com.^FS
^FO030,390^A0N,33,36^CI13^FR^FN18^FS
^FO585,205^A0N,70,130^CI13^FR^FN19^FS
^FO595,305^A0N,70,130^CI13^FR^FN20^FS
^FO585,405^A0N,70,130^CI13^FR^FN21^FS
^BY5,3.0^FO030,424^BCN,72,N,Y,N^FR^FN11^FS
^XZ
^XA^XFR:FOR_ALV.ZPL^FS
^FN1^FDCOUNTRY^FS
^FN2^FDDESTINYL^FS
^FN3^FDSTREETII   #Ext 17804^FS
^FN4^FDVISTAS DEL MAR ^FS
^FN5^FDSTATE, COUNTRY^FS
^FN6^FD1 CARRO 2^FS
^FN7^FD09:59^FS
^FN8^FD^FS
^FN9^FD04/01/21^FS
^FN10^FDY19561^FS
^FN11^FD>:Y19561^FS
^FN12^FD108.3^FS
^FN13^FDDE 1^FS
^FN14^SN001,1,N^FS
^FN15^FD0^FS
0^FS
^FN17^FDCON^FS
^FN18^FDTEL ^FS
^FN19^FDC^FS
^FN20^FDO^FS
^FN21^FDN^FS
^PQ1,0,0,N
^XZ
"

attached image of the label virtula, the size is 4 x 2 .6:

enter image description here

attached image of the label physical the size is 4x2.6: Label not show "C O N" enter image description here

Solution

  • This usually occurs when the print width is configured to be less than the physical label width. Use the ^PW command to set the width. For a 4" label at 203dpi, for example, add ^PW812 to the top of your label format, right after the ^PRC.

    NOTE: If you are using the full with of the label and you don't know the physical size of the label or the printer dpi, you could set the PRINT WITH to something insanely large, it will automatically be truncated to the correct value. From the docs:

    If the value exceeds the width of the label, the width is set to the label’s maximum size