Search code examples
javaudpbroadcastdatagram

Sending packets to 255.255.255.255 by Java DatagramSocket fails

I'm programming a networking program in java , and I want to send some Packets to 255.255.255.255, but it fails , even when I send them to 192.168.1.255, which according to the output of ifconfig command , is the broadcast address. But when I send them to my mate's IP it works fine.

Here's the code to my program : 

public class StackOverFlow {
    public static void main(String[] args) {
        Network net= new Network();

        Scanner input= new Scanner(System.in);
        while(input.hasNext())
          net.sendMessage(input.nextLine());
    }
}

I've used DatagarmSocket and DatagramPacket to do so , here's my implementation of the Network :

class Network {
DatagramSocket socket;

public Network() {
    try {
        socket = new DatagramSocket(8027);
        socket.connect(InetAddress.getByName("255.255.255.255"), 8027);
    } catch (Exception e) {
        System.err.println("Connection failed. " + e.getMessage());
    }
    listen();
}

public void listen() {
    new Thread() {
        public void run() {
            while (true) {
                try {
                    byte[] buf = new byte[1000];
                    DatagramPacket packet = new DatagramPacket(buf,
                            buf.length);
                    socket.receive(packet);
                    String message = new String(buf);
                    System.out.println("Recieved: " + message);
                    if (message.equals("end"))
                        return;
                } catch (Exception e) {
                    System.err.println(e.getMessage());
                }
            }
        }
    }.start();
}

public void sendMessage(String message){
    byte[] buf= message.getBytes();

    DatagramPacket packet= new DatagramPacket(buf, buf.length);
    try{
        socket.send(packet);
    }catch(Exception e){
        System.err.println("Sending failed. " + e.getMessage());
    }
}

No Exceptions are being thrown.
I'm in an ad hoc network.
I'm using MAC OS X 10.6 while my mate is using kubuntu 11.04. And here is ifconfig output:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128 
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21f:f3ff:fed5:4779%en0 prefixlen 64 scopeid 0x4 
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:1f:f3:d5:47:79 
media: autoselect (100baseTX <full-duplex>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP     <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-    duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none

en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21d:4fff:feff:2b4d%en1 prefixlen 64 scopeid 0x5 
inet 213.233.170.97 netmask 0xfffffc00 broadcast 213.233.171.255
ether 00:1d:4f:ff:2b:4d 
media: autoselect status: active
supported media: autoselect

fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:21:e9:ff:fe:bc:79:b2 
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>

en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:1f:f3:b6:2c:be 
media: autoselect status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>

vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.149.1 netmask 0xffffff00 broadcast 192.168.149.255
ether 00:50:56:c0:00:01 

vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.73.1 netmask 0xffffff00 broadcast 192.168.73.255
ether 00:50:56:c0:00:08

en0 is the device I'm using to connect to my mate.

Please make it simple, I'm a newbie :)

Thanks in advance.

Solution

  • While using broadcasting you need to enable it

    socket.setBroadcast(true);

    Another thing is that you have to make sure that your router is configured right if the two computers are in two different nets. Broadcasts are usually by default not routed. Further if you have a router having a wirless interface and a wired interface these broadcasts may not work either if broadcasts are not enabled(There may be hardware which forward broadcasts between those two interfaces by default).