How to tell if there is fault in the truth table?
In my digital design and computer architecture class.Our teacher gave a truth table for which we had to construct a K-map and minimize it to find the boolean expression
But some of the students quickly identified that there were mistakes in the truth table and started pointing out the mistake.How did they do that?Is there a way to identify mistakes in a truth table?What am I missing?
With this truth table, there are four inputs.
That would mean you would have every combination of settings across inputs (a, b, c, and d). However, this table has two entries for (0, 0, 0, 0) and no entry for (0, 0, 0, 1)
Since the table doesn't cover all the inputs, there is an error in the table because it does not detail what Y should be for (0, 0, 0, 1) In addition, there are two answers for (0, 0, 0, 0), answer (0) and answer (1). Since any logical mapping of inputs can only lead to one output, this table has a second different kind of error.
- FLOPs per cycle for Sandy Bridge and Haswell and others SSE2 / AVX / AVX2 / AVX-512
- How can I implement the overflow flag in Logisim without having access to the second last carry?
- Difference between x86, x32, and x64 architectures?
- What does it mean by word size in computer?
- The most efficient way to test if a positive integer is 2^n (i.e. 1, 2, 4, 8, etc.) in C++20?
- What is the cost of atomic operations?
- How can the control hardware know which registers to read before it completes decoding the instruction?
- Microarchitectural zeroing of a register via the register renamer: performance versus a mov?
- Why do I get 'Error executing binary file' despite compiling for the correct architecture?
- Hardware interrupt when Power Button pressed?
- Program Counter incrementation
- Why is processing a sorted array faster than processing an unsorted array?
- Is lock acquiring function atomic?
- Understanding micro-architectural causes for longer code to execute 4x faster (AMD Zen 2 architecture)
- when we say a memory controller does it mean the component that manages communication between the RAM and the processor only?
- In shift left instruction, why is rt used as source register instead of rs?
- Intel vs AMD gather AVX performance
- In a RISC-V architecture, do jump instructions (conditional or JAL/JALR) increase the PC by 4 as the rest of the instructions?
- Why is memory aliasing needed?
- Understanding LW in MIPS
- How can x86 bsr/bsf have fixed latency, not data dependent? Doesn't it loop over bits like the pseudocode shows?
- Getting docker-entrypoint.sh: exec format error while the architecture matches
- Implementing closures and performance impacts of, for instance, relative vs absolute jump
- Are data memory and instruction memory in data path L1 caches?
- How does gem decide, which arch-specific gem to install?
- Why is the size of L1 cache smaller than that of the L2 cache in most of the processors?
- PCIe TLP write packet address only 31:2 bits
- Determine target ISA extensions of binary file in Linux (library or executable)
- Does endianess depend on processor or memory?
- Memory Barrier Vs CAS