I've created a library in an attempt to handle all of the "quirks" of using Crystal Reports in a Visual Studio (VB.NET) project. I've pulled together all the elements that have presented challenges to me in the past - setting/updating parameter and formula values, printing (including page ranges), and setting logon credentials - and put them into reusable methods that all seem to work well when I generate the reports individually.
However, I've run into a scenario where I want to reuse the same report object in a loop to print multiple variations with different data sets/parameter(s) so that I can "easily" reuse the same printer settings and other options without re-prompting the user for each iteration. In this case, I'm working with an internally built DataSet object (built by someone other than me) and my Crystal Report file's Data Source is pointing to the .xsd file for structure.
EDIT: Forgot to mention that the report was created in CR Developer v11.5.12.1838 and the VB.NET library project is targetting the 4.7.2 .NET framework and using the v13.0.3500.0 (runtime v2.0.50727) of the Crystal libraries.
My intent is/was to instantiate a new report object outside the loop, then just re-set and refresh the report's data source and parameter values on each iteration of the loop. Unfortunately, it seems that if I do it this way, the report won't correctly pick up either the parameter values, the updated data source, or both. I've been trying several variations of code placement (because I know that the order in which things are done is very important to the Crystal Reports engine), but none of it seems to work the way I believe it should.
If I instantiate a new report object inside the loop, it will correctly generate the reports for each iteration with the correct data source and parameter values. Of course, it resets all of the internal properties of my class to "default", which kinda defeats the purpose. (Yes, I know I could pass additional/other parameters to a constructor to achieve the effect, but that seems an extremely "brute-force" solution, and I'd much rather get it to work the way I have in mind).
Here is a pared-down/obfuscated version of the most recent iteration of the calling method (currently a part of a button click event handler). Every attempt I've made to instantiate a reusable object seems to result in some sort of failure. In this version, it loads the report and correctly passes along the parameter value, but the data source is completely empty resulting in a blank report. In other variations (I've discarded that code now), when I actually try to print/export/show the report, it fails with a COM exception: Missing parameter values.
I've tried using the .Refresh and .ReportClientDocument.VerifyDatabase methods separately, but those don't make a difference. When I check the parameters at runtime, it appears that the CR parameter/value and query results have been populated, but any method that makes any changes after the initialization just seems to "break" the report.
Dim ReportName As String = "\\SERVERNAME\Applications\Reports\ClientActiveCustomerSummary.rpt"
Dim Report As Common.CRReport = Nothing
Try
ReportData = ClientDataSet.Tables("ActiveSummary").Copy
ReportData = GetClientActiveSummaryData
Catch ex As Exception
MessageBox.Show(ex.Message & vbCrLf & vbCrLf &
"Error while retrieving client customer summary report data.",
"ERROR", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
If ReportData.Rows.Count > 0 Then
Report = New Common.CRReport(Common.CRReport.ReportSourceType.ADODataSet, New IO.FileInfo(ReportName), ClientDataSet)
For Each LVItem As ListViewItem In checkItemsMP
Dim ClientQuery = From ap In ReportData.AsEnumerable
Where ap.Field(Of Object)("mp") = LVItem.SubItems("mp").Text
Order By ap.Field(Of Object)("customername")
Select ap
ClientDataSet.Tables("ActiveSummary").Merge(ClientQuery.CopyToDataTable)
Report.ReportParameters.Clear()
Report.AddReportParameter("ClientName", LVItem.SubItems("clientname").Text)
Report.GenerateReport()
ClientDataSet.Tables("ActiveSummary").Clear()
ClientQuery = Nothing
Next LVItem
For Each LVItem As ListViewItem In checkItemsBN
Dim BranchName As String = LVItem.SubItems("clientname").Text & " " & LVItem.SubItems("branchname").Text
Dim BranchQuery = From ap In ReportData.AsEnumerable
Where (ap.Field(Of Object)("clientname") & " " & ap.Field(Of Object)("branchname")) = BranchName
Order By ap.Field(Of Object)("customername")
Select ap
ClientDataSet.Tables("ActiveSummary").Merge(BranchQuery.CopyToDataTable)
Report.ReportParameters.Clear()
Report.AddReportParameter("ClientName", BranchName)
Report.GenerateReport()
ClientDataSet.Tables("ActiveSummary").Clear()
BranchQuery = Nothing
Next LVItem
Else
MessageBox.Show("NO RECORDS FOUND", "Information", MessageBoxButtons.OK, MessageBoxIcon.Information)
ReportData.Dispose()
ReportData = Nothing
End If
Obviously, in this case, I'm passing in an ADO.NET DataSet object and using a value retrieved from a ListView on the form itself for the value of the report's single parameter. Again, if I instantiate a new CRReport object on each iteration of the loop, the report will create normally with the correct data and parameter value, but it prompts the user each time for the report creation options (print/show/export, then - if "print" is selected - again for which printer to use).
And here is the reporting class. (Please understand that this is a work in progress and is far from "production quality" code):
CRReport)Imports System.IO
Imports CrystalDecisions.Shared
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.ReportAppServer.DataDefModel
Imports System.Drawing
Imports System.Windows.Forms
Public Class CRReport
Inherits ReportDocument
Public Enum ReportSourceType
PostgreSQL = 1
MySQL = 2
ADODataSet = 3
XML = 4
CSV = 5
Access = 6
End Enum
Public Enum GenerateReportOption
None = 0
DisplayOnScreen = 1
SendToPrinter = 2
ExportToFile = 3
MailToRecipient = 4
End Enum
Public Property ReportFile As FileInfo
Public Property ExportPath As String
Public Property ReportParameters As List(Of CRParameter)
Public Property ReportFormulas As List(Of CRFormula)
Public Property SourceType As ReportSourceType
Private Property XMLDataSource As FileInfo
Private Property ADODataSet As System.Data.DataSet
Private Property ReportOption As GenerateReportOption
Private WithEvents DocumentToPrint As Printing.PrintDocument
#Region "PUBLIC METHODS"
#Region "CONSTRUCTORS"
Public Sub New(ByVal SourceType As ReportSourceType, ByVal CurrentReportFile As FileInfo)
Me.Initialize()
Me.SourceType = SourceType
Me.ReportFile = CurrentReportFile
PrepareReport()
End Sub
Public Sub New(ByVal SourceType As ReportSourceType, ByVal CurrentReportFile As FileInfo, ByVal XMLFile As FileInfo)
Me.Initialize()
Me.SourceType = SourceType
Me.ReportFile = CurrentReportFile
Me.XMLDataSource = XMLFile
PrepareReport()
End Sub
Public Sub New(ByVal SourceType As ReportSourceType, ByVal CurrentReportFile As FileInfo, ByVal ADODataSource As System.Data.DataSet)
Me.Initialize()
Me.SourceType = SourceType
Me.ReportFile = CurrentReportFile
Me.ADODataSet = ADODataSource
PrepareReport()
End Sub
Public Sub New(ByVal SourceType As ReportSourceType, ByVal CurrentReportFile As FileInfo, ByVal CurrentExportPath As String)
Me.Initialize()
Me.SourceType = SourceType
Me.ReportFile = CurrentReportFile
Me.ExportPath = CurrentExportPath
If Not Me.ExportPath Is Nothing AndAlso Not String.IsNullOrEmpty(Me.ExportPath) Then
Dim ExportFile As New IO.FileInfo(Me.ExportPath)
If Not IO.Directory.Exists(ExportFile.DirectoryName) Then
IO.Directory.CreateDirectory(ExportFile.DirectoryName)
End If
End If
PrepareReport()
End Sub
#End Region
Public Sub AddReportParameter(ByVal CurrentParameterName As String, ByVal CurrentParameterValue As Object)
If Not String.IsNullOrEmpty(CurrentParameterName) Then
Dim NewParameter As New CRParameter(Me, CurrentParameterName, CurrentParameterValue)
Me.ReportParameters.Add(NewParameter)
End If
End Sub
Public Sub AddReportFormula(ByVal CurrentFormulaName As String, ByVal CurrentFormulaValue As Object)
If Not String.IsNullOrEmpty(CurrentFormulaName) Then
Dim NewFormula As New CRFormula(Me, CurrentFormulaName, CurrentFormulaValue)
Me.ReportFormulas.Add(NewFormula)
End If
End Sub
Public Sub GenerateReport(ByVal ReportOption As GenerateReportOption)
If Me.ReportOption = GenerateReportOption.None Then
' THIS DIALOG IS SOLELY FOR PROMPTING THE USER FOR HOW TO GENERATE THE REPORT
Dim ReportDialog As New dlgGenerateReport
Me.ReportOption = ReportDialog.GetReportGenerationOption()
End If
If Not Me.ReportOption = GenerateReportOption.None Then
Select Case ReportOption
Case GenerateReportOption.DisplayOnScreen
Me.ShowReport()
Case GenerateReportOption.SendToPrinter
Me.PrintReport()
Case GenerateReportOption.ExportToFile
Me.ExportReport()
End Select
End If
End Sub
#End Region
#Region "PRIVATE METHODS"
Private Sub Initialize()
Me.ReportFile = Nothing
Me.ExportPath = String.Empty
Me.ADODataSet = Nothing
Me.XMLDataSource = Nothing
Me.ReportParameters = New List(Of CRParameter)
Me.ReportFormulas = New List(Of CRFormula)
Me.SourceType = ReportSourceType.XML
Me.ReportOption = GenerateReportOption.None
End Sub
Private Sub PrepareReport()
If Not Me.ReportFile Is Nothing Then
Me.Load(Me.ReportFile.FullName)
Me.DataSourceConnections.Clear()
SetReportConnectionInfo()
If Me.ReportFormulas.Count > 0 Then
For Each Formula As CRFormula In Me.ReportFormulas
Formula.UpdateFormulaField()
Next Formula
End If
If Me.ReportParameters.Count > 0 Then
For Each Parameter As CRParameter In Me.ReportParameters
Parameter.UpdateReportParameter()
Next Parameter
End If
Me.Refresh()
Me.ReportClientDocument.VerifyDatabase()
End If
End Sub
Private Sub SetReportConnectionInfo()
If Me.SourceType = ReportSourceType.PostgreSQL Then
Dim CRDatabase As CrystalDecisions.CrystalReports.Engine.Database = Me.Database
Dim CRTables As CrystalDecisions.CrystalReports.Engine.Tables = CRDatabase.Tables
Dim CRConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
Dim DBUsername As String = Utility.GetUsername
Dim DBPassword As String = Utility.GetPassword
With CRConnectionInfo
.DatabaseName = <DATABASENAME>
.ServerName = <HOSTNAME>
.UserID = DBUsername
.Password = DBPassword
End With
For Each CRTable As CrystalDecisions.CrystalReports.Engine.Table In CRTables
Dim CRTableLogonInfo As CrystalDecisions.Shared.TableLogOnInfo = CRTable.LogOnInfo
CRTableLogonInfo.ConnectionInfo = CRConnectionInfo
CRTable.ApplyLogOnInfo(CRTableLogonInfo)
Next CRTable
ElseIf Me.SourceType = ReportSourceType.ADODataSet Then
Dim CRDatabase As CrystalDecisions.CrystalReports.Engine.Database = Me.Database
Dim CRTables As CrystalDecisions.CrystalReports.Engine.Tables = CRDatabase.Tables
For Each CRTable As CrystalDecisions.CrystalReports.Engine.Table In CRTables
For Each ADOTable As DataTable In ADODataSet.Tables
If CRTable.Name.ToUpper.Trim = ADOTable.TableName.ToUpper.Trim Then
CRTable.SetDataSource(ADOTable)
Exit For
End If
Next ADOTable
Next CRTable
Me.ReportClientDocument.VerifyDatabase()
ElseIf Me.SourceType = ReportSourceType.XML Then
If Not Me.XMLDataSource Is Nothing AndAlso Me.XMLDataSource.Exists Then
Dim CRDatabaseAttributes As New CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag
Dim CRLogonProperties As New CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag
Dim CRConnectionDetails As New CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo
Dim CRTable As CrystalDecisions.ReportAppServer.DataDefModel.Table
Dim CRTables As CrystalDecisions.ReportAppServer.DataDefModel.Tables = Me.ReportClientDocument.DatabaseController.Database.Tables
Dim XMLData As New System.Data.DataSet
XMLData.ReadXml(Me.XMLDataSource.FullName)
With CRLogonProperties
.Add("File Path ", Me.XMLDataSource.FullName)
.Add("Internal Connection ID", "{be7cdac3-6a64-4923-8177-898ab55d0fa0}")
End With
With CRDatabaseAttributes
.Add("Database DLL", "crdb_adoplus.dll")
.Add("QE_DatabaseName", "")
.Add("QE_DatabaseType", "")
.Add("QE_LogonProperties", CRLogonProperties)
.Add("QE_ServerDescription", Me.XMLDataSource.Name.Substring(0, Me.XMLDataSource.Name.Length - Me.XMLDataSource.Extension.Length))
.Add("QE_SQLDB", "False")
.Add("SSO Enabled", "False")
End With
With CRConnectionDetails
.Attributes = CRDatabaseAttributes
.Kind = CrystalDecisions.ReportAppServer.DataDefModel.CrConnectionInfoKindEnum.crConnectionInfoKindCRQE
.UserName = ""
.Password = ""
End With
For I As Integer = 0 To XMLData.Tables.Count - 1
CRTable = New CrystalDecisions.ReportAppServer.DataDefModel.Table
With CRTable
.ConnectionInfo = CRConnectionDetails
.Name = XMLData.Tables(I).TableName
.QualifiedName = XMLData.Tables(I).TableName
.[Alias] = XMLData.Tables(I).TableName
End With
Me.ReportClientDocument.DatabaseController.SetTableLocation(CRTables(I), CRTable)
Next I
Me.ReportClientDocument.VerifyDatabase()
End If
End If
End Sub
Private Sub PrintReport()
If Me.DocumentToPrint Is Nothing Then
' THIS IS WHY I WANT TO REUSE THE REPORTING OBJECT
' IF I CAN SET/SAVE THE PRINT DOCUMENT/SETTINGS WITHIN THE OBJECT,
' THE USER SHOULD ONLY HAVE TO RESPOND ONCE FOR ANY ITERATIONS
' USING THE SAME REPORT OBJECT
Dim SelectPrinter As New PrintDialog
Dim PrinterSelected As DialogResult = DialogResult.Cancel
Me.DocumentToPrint = New Printing.PrintDocument
With SelectPrinter
.Document = DocumentToPrint
.AllowPrintToFile = False
.AllowSelection = False
.AllowCurrentPage = False
.AllowSomePages = False
.PrintToFile = False
.UseEXDialog = True
End With
PrinterSelected = SelectPrinter.ShowDialog()
If PrinterSelected = DialogResult.OK Then
SendToPrinter()
End If
Else
SendToPrinter()
End If
End Sub
Private Sub SendToPrinter()
Dim Copies As Integer = DocumentToPrint.PrinterSettings.Copies
Dim PrinterName As String = DocumentToPrint.PrinterSettings.PrinterName
Dim LastPageNumber As Integer = 1
' IF THE PARAMETER VALUE DOESN'T GET PASSED/UPDATED PROPERLY
' THIS LINE WILL THROW A COM EXCEPTION 'MISSING PARAMETER VALUE'
LastPageNumber = Me.FormatEngine.GetLastPageNumber(New CrystalDecisions.Shared.ReportPageRequestContext())
Me.PrintOptions.CopyTo(DocumentToPrint.PrinterSettings, DocumentToPrint.DefaultPageSettings)
If DocumentToPrint.PrinterSettings.SupportsColor Then
DocumentToPrint.DefaultPageSettings.Color = True
End If
Me.PrintOptions.CopyFrom(DocumentToPrint.PrinterSettings, DocumentToPrint.DefaultPageSettings)
Me.PrintOptions.PrinterName = PrinterName
Me.PrintOptions.PrinterDuplex = CType(DocumentToPrint.PrinterSettings.Duplex, PrinterDuplex)
Me.PrintToPrinter(Copies, True, 1, LastPageNumber)
End Sub
Private Function ExportReport() As IO.FileInfo
Dim ExportFile As IO.FileInfo = Nothing
If Not Me.ExportPath Is Nothing AndAlso Not String.IsNullOrEmpty(Me.ExportPath) Then
ExportFile = New IO.FileInfo(Me.ExportPath)
If Not ExportFile.Exists Then
Me.ExportToDisk(ExportFormatType.PortableDocFormat, ExportFile.FullName)
Else
Dim Response As DialogResult = DialogResult.Cancel
Response = MessageBox.Show(ExportFile.Name & " already exists in this location." & vbCrLf & vbCrLf &
"Do you want to overwrite the existing file?" & vbCrLf & vbCrLf &
"Click [Y]ES to overwrite the existing file" & vbCrLf &
"Click [N]O to create a new file" & vbCrLf &
"Click [C]ANCEL to cancel the export process",
"PDF ALREADY EXISTS",
MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation, MessageBoxDefaultButton.Button2)
If Response = DialogResult.Yes Then
ExportFile.Delete()
ElseIf Response = DialogResult.No Then
ExportFile = New IO.FileInfo(Common.Utility.IncrementExistingFileName(Me.ExportPath))
Else
ExportFile = Nothing
End If
If Not ExportFile Is Nothing Then
Me.ExportToDisk(ExportFormatType.PortableDocFormat, ExportFile.FullName)
End If
End If
End If
Return ExportFile
End Function
Private Sub ShowReport()
Dim ReportViewer As New frmReportPreview
With ReportViewer
.rptViewer.ReportSource = Nothing
.rptViewer.ReportSource = Me
.WindowState = FormWindowState.Maximized
.rptViewer.RefreshReport()
' Set zoom level: 1 = Page Width, 2 = Whole Page, 25-100 = zoom %
.rptViewer.Zoom(1)
.rptViewer.Show()
.Show()
End With
End Sub
Private Sub EmailReport(ByRef ReportMail As System.Net.Mail.MailMessage)
Dim ReportAttachment As IO.FileInfo = ExportReport()
If Not ReportAttachment Is Nothing AndAlso ReportAttachment.Exists Then
ReportMail.Attachments.Add(New System.Net.Mail.Attachment(ReportAttachment.FullName))
If Utility.SendEmailMessage(ReportMail) Then
End If
End If
End Sub
#End Region
I've tried adding calls to the PrepareReport method (again) in the GenerateReport method of CRReport class so that it would reset the data source and parameter values, but it seems that it still doesn't get everything properly set up in the actual Crystal Report object for report generation. My experience so far has been that I have to set all of this on instantiation for some reason or it just fails completely.
For reference purposes, the parameters and formulae for Crystal are encapsulated in their own classes:
CRParameter)#Region "CRYSTAL REPORTS PARAMETER CLASS"
Public Class CRParameter
Public Property CurrentReport As CRReport
Public Property ParameterName As String
Public Property ParameterValue As Object
Public Sub New(ByVal Report As CRReport)
Me.CurrentReport = Report
Me.ParameterName = String.Empty
Me.ParameterValue = Nothing
End Sub
Public Sub New(ByVal Report As CRReport, ByVal CurrentParameterName As String, ByVal CurrentParameterValue As Object)
Me.CurrentReport = Report
Me.ParameterName = CurrentParameterName
Me.ParameterValue = CurrentParameterValue
UpdateReportParameter()
End Sub
Friend Sub UpdateReportParameter()
If Not Me.CurrentReport Is Nothing Then
If Not String.IsNullOrEmpty(Me.ParameterName) Then
Dim CRFieldDefinitions As ParameterFieldDefinitions = Nothing
Dim CRFieldDefinition As ParameterFieldDefinition = Nothing
Dim CRValues As ParameterValues = Nothing
Dim CRDiscreteValue As ParameterDiscreteValue = Nothing
Try
CRFieldDefinitions = Me.CurrentReport.DataDefinition.ParameterFields
CRFieldDefinition = CRFieldDefinitions.Item(Me.ParameterName)
CRValues = CRFieldDefinition.CurrentValues
CRValues.Clear()
CRDiscreteValue = New ParameterDiscreteValue
CRDiscreteValue.Description = Me.ParameterName
CRDiscreteValue.Value = Me.ParameterValue
CRValues.Add(CRDiscreteValue)
CRFieldDefinition.ApplyCurrentValues(CRValues)
CRFieldDefinition.ApplyDefaultValues(CRValues)
Catch ex As Exception
Throw
Finally
If Not CRFieldDefinitions Is Nothing Then
CRFieldDefinitions.Dispose()
End If
If Not CRFieldDefinition Is Nothing Then
CRFieldDefinition.Dispose()
End If
If Not CRValues Is Nothing Then
CRValues = Nothing
End If
If Not CRDiscreteValue Is Nothing Then
CRDiscreteValue = Nothing
End If
End Try
End If
End If
End Sub
End Class
#End Region
CRFormula)I realize this falls outside the scope of the original question, but for the sake of completeness, I wanted to include it in case someone else might be looking for code to use.
#Region "CRYSTAL REPORTS FORMULA VALUE CLASS"
Public Class CRFormula
Public Property CurrentReport As CRReport
Public Property FormulaName As String
Public Property FormulaValue As Object
Public Sub New(ByVal Report As CRReport)
Me.CurrentReport = Report
Me.FormulaName = String.Empty
Me.FormulaValue = Nothing
End Sub
Public Sub New(ByVal Report As CRReport, ByVal NewFormulaName As String, ByVal NewFormulaValue As Object)
Me.CurrentReport = Report
Me.FormulaName = NewFormulaName
Me.FormulaValue = NewFormulaValue
'UpdateFormulaField()
End Sub
Friend Sub UpdateFormulaField()
If Not Me.CurrentReport Is Nothing Then
If Not String.IsNullOrEmpty(Me.FormulaName) Then
Try
If Me.FormulaValue Is Nothing Then
Me.FormulaValue = ""
Me.CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
ElseIf TypeOf Me.FormulaValue Is String AndAlso String.IsNullOrEmpty(Convert.ToString(Me.FormulaValue)) Then
Me.FormulaValue = ""
Me.CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
ElseIf TypeOf Me.FormulaValue Is String AndAlso Not String.IsNullOrEmpty(Convert.ToString(Me.FormulaValue)) Then
Me.FormulaValue = "'" & Me.FormulaValue.ToString & "'"
Me.CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
ElseIf TypeOf Me.FormulaValue Is Date Then
Me.FormulaValue = "'" & Convert.ToDateTime(Me.FormulaValue).ToString("yyyy-MM-dd") & "'"
Me.CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
Else
Me.CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
End If
Catch ex As Exception
End Try
End If
End If
End Sub
End Class
#End Region
I've tried to include as much detail and information about the challenge I'm facing as possible, but please feel free to ask any questions about any of it if you require clarification.
Okay, I believe I've found the cause of the problem, and it's one of those "quirks" I mentioned at the top of my question. The Crystal Reports engine is very particular about the order of certain events, and this is one of those cases. In my original PrepareReport() method, I had the calls to the .Refresh() and .VerifyDatabase() methods executing last. This (apparently) effectively "resets" the parameters/data source, so everything I had above it was basically nullified.
So, I went back through some older code to look at how I've worked with individual Crystal Reports in the past and found that calling the .Refresh() and .VerifyDatabase() methods prior to attempting to set parameter and/or formula values seems to work as expected, so I moved those two lines up in the PrepareReport() code and tried again. It all seemed to work correctly. Several tests later, and the order of execution appears to be the culprit here. Now my PrepareReport() method looks like this:
Private Sub PrepareReport()
If Not Me.CRReportFile Is Nothing Then
Me.CrystalReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
Me.CrystalReport.Load(Me.CRReportFile.FullName)
Me.CrystalReport.DataSourceConnections.Clear()
SetReportConnectionInfo()
'MOVED THIS UP IN THE EXECUTION ORDER
Me.CrystalReport.Refresh()
Me.CrystalReport.ReportClientDocument.VerifyDatabase()
If Me.ReportFormulas.Count > 0 Then
For Each Formula As CRFormula In Me.ReportFormulas
Formula.UpdateFormulaField(Me.CrystalReport)
Next Formula
End If
If Me.ReportParameters.Count > 0 Then
For Each Parameter As CRParameter In Me.ReportParameters
Parameter.UpdateReportParameter(Me.CrystalReport)
Next Parameter
End If
' THE REFRESH() & VERIFYDATABASE() METHOD CALLS USED TO BE DOWN HERE
End If
End Sub
A couple of other things I tried while troubleshooting, none of which resulted in complete success, although some produced varying degrees:
MyBase.Dispose() (Obviously this was a bad idea). Of course, I couldn't instantiate a new base object without entirely recreating the CRReport object, which was what I was trying to avoid in the first place.CrystalDecisions.CrystalReports.Engine.ReportDocument object that could be instantiated independently of my class. Even though it may seem unnecessary, this actually wasn't a horrible idea as I'll explain later.Since everything seems to be working now with the revised PrepareReport() code, I've done a bit of refactoring. Instead of calling this method multiple times (once at instantiation and once at report generation), I removed the calls from the constructors and put a single call to it in the GenerateReport() method.
I did some additional testing using the ShowReport() method (display it on the screen instead of printing it on paper), and there was some "weirdness", so I had to make adjustments. In my calling method (the button click event), I tried to dispose of the CRReport object after generating all of the reports, but that caused me not to be able to switch pages after the reports were generated/displayed (I got a NullReferenceException - Object reference not set to an instance of an object). A minor tweak later, and I could get the reports to stay instantiated but, due to the data set being overridden by later iterations, it wasn't always showing the correct data in each window.
This is where my removing of the inheritance comes into play. I created a private CrystalDecisions.CrystalReports.Engine.ReportDocument object for the class that could be reinstantiated and passed around a bit that would retain only the data associated with that particular instance of the report. I refactored the code for the CRReport, CRParameter, and CRFormula objects to use that new private variable instead, and everything looks like it's behaving exactly as expected.
Please remember, not all of this has been fully tested. I've yet to test the ExportReport() method b/c I need to clean up a couple of things there, and the EmailReport() method has a long way to go. I've only tested it with the ADO.NET DataSet during this run, although the code used for XML and PostgreSQL has worked in the past.
CRReport)Public Class CRReport
Public Property CRReportFile As FileInfo
Public Property ReportParameters As List(Of CRParameter)
Public Property ReportFormulas As List(Of CRFormula)
Public Property SourceType As ReportSourceType
Public Property ExportPath As String
Get
Return ExportReportToPath
End Get
Set(value As String)
If Not value Is Nothing AndAlso Not String.IsNullOrEmpty(value) Then
Dim ExportFile As New IO.FileInfo(value)
If Not IO.Directory.Exists(ExportFile.DirectoryName) Then
IO.Directory.CreateDirectory(ExportFile.DirectoryName)
End If
ExportReportToPath = ExportFile.FullName
End If
End Set
End Property
Private Property XMLDataSource As FileInfo
Private Property ADODataSet As System.Data.DataSet
Private Property ReportOption As GenerateReportOption
Private CrystalReport As CrystalDecisions.CrystalReports.Engine.ReportDocument
Private ExportReportToPath As String
Public Enum ReportSourceType
PostgreSQL = 1
MySQL = 2
ADODataSet = 3
XML = 4
CSV = 5
Access = 6
End Enum
Public Enum GenerateReportOption
None = 0
DisplayOnScreen = 1
SendToPrinter = 2
ExportToFile = 3
MailToRecipient = 4
End Enum
Private WithEvents DocumentToPrint As Printing.PrintDocument
#Region "PUBLIC METHODS"
Public Sub New(ByVal CurrentReportFile As FileInfo, ByVal XMLFile As FileInfo)
Me.Initialize()
Me.SourceType = ReportSourceType.XML
Me.CRReportFile = CurrentReportFile
Me.XMLDataSource = XMLFile
End Sub
Public Sub New(ByVal CurrentReportFile As FileInfo, ByVal ADODataSource As System.Data.DataSet)
Me.Initialize()
Me.SourceType = ReportSourceType.ADODataSet
Me.CRReportFile = CurrentReportFile
Me.ADODataSet = ADODataSource
End Sub
Public Sub AddReportParameter(ByVal CurrentParameterName As String, ByVal CurrentParameterValue As Object)
If Not String.IsNullOrEmpty(CurrentParameterName) Then
Dim NewParameter As New CRParameter(CurrentParameterName, CurrentParameterValue)
Me.ReportParameters.Add(NewParameter)
End If
End Sub
Public Sub AddReportFormula(ByVal CurrentFormulaName As String, ByVal CurrentFormulaValue As Object)
If Not String.IsNullOrEmpty(CurrentFormulaName) Then
Dim NewFormula As New CRFormula(CurrentFormulaName, CurrentFormulaValue)
Me.ReportFormulas.Add(NewFormula)
End If
End Sub
Public Sub GenerateReport()
If Me.ReportOption = GenerateReportOption.None Then
Dim ReportDialog As New dlgGenerateReport
Me.ReportOption = ReportDialog.GetReportGenerationOption()
End If
If Not Me.ReportOption = GenerateReportOption.None Then
GenerateReport(Me.ReportOption)
End If
End Sub
Public Sub GenerateReport(ByVal ReportOption As GenerateReportOption)
If Me.ReportOption = GenerateReportOption.None Then
Dim ReportDialog As New dlgGenerateReport
Me.ReportOption = ReportDialog.GetReportGenerationOption()
End If
If Not Me.ReportOption = GenerateReportOption.None Then
PrepareReport()
Select Case ReportOption
Case GenerateReportOption.DisplayOnScreen
Me.ShowReport()
Case GenerateReportOption.SendToPrinter
Me.PrintReport()
Case GenerateReportOption.ExportToFile
Me.ExportReport()
End Select
End If
End Sub
Private Sub PrintReport()
If Me.DocumentToPrint Is Nothing Then
Dim SelectPrinter As New PrintDialog
Dim PrinterSelected As DialogResult = DialogResult.Cancel
Me.DocumentToPrint = New Printing.PrintDocument
Me.CrystalReport.PrintOptions.CopyTo(Me.DocumentToPrint.PrinterSettings, Me.DocumentToPrint.DefaultPageSettings)
With SelectPrinter
.Document = DocumentToPrint
.AllowPrintToFile = False
.AllowSelection = False
.AllowCurrentPage = False
.AllowSomePages = False
.PrintToFile = False
.UseEXDialog = True
End With
PrinterSelected = SelectPrinter.ShowDialog()
If PrinterSelected = DialogResult.OK Then
SendToPrinter()
End If
Else
SendToPrinter()
End If
End Sub
Private Sub SendToPrinter()
If Not Me.DocumentToPrint Is Nothing Then
Dim Copies As Integer = Me.DocumentToPrint.PrinterSettings.Copies
Dim PrinterName As String = Me.DocumentToPrint.PrinterSettings.PrinterName
Dim LastPageNumber As Integer = 1
LastPageNumber = Me.CrystalReport.FormatEngine.GetLastPageNumber(New CrystalDecisions.Shared.ReportPageRequestContext())
Me.CrystalReport.PrintOptions.CopyFrom(Me.DocumentToPrint.PrinterSettings, Me.DocumentToPrint.DefaultPageSettings)
Me.CrystalReport.PrintOptions.PrinterName = PrinterName
Me.CrystalReport.PrintOptions.PrinterDuplex = CType(Me.DocumentToPrint.PrinterSettings.Duplex, PrinterDuplex)
Me.CrystalReport.PrintToPrinter(Copies, True, 1, LastPageNumber)
End If
End Sub
Private Function ExportReport() As IO.FileInfo
Dim ExportFile As IO.FileInfo = Nothing
If Not Me.ExportPath Is Nothing AndAlso Not String.IsNullOrEmpty(Me.ExportPath) Then
ExportFile = New IO.FileInfo(Me.ExportPath)
If Not ExportFile.Exists Then
Me.CrystalReport.ExportToDisk(ExportFormatType.PortableDocFormat, ExportFile.FullName)
Else
Dim Response As DialogResult = DialogResult.Cancel
Response = MessageBox.Show(ExportFile.Name & " already exists in this location." & vbCrLf & vbCrLf &
"Do you want to overwrite the existing file?" & vbCrLf & vbCrLf &
"Click [Y]ES to overwrite the existing file" & vbCrLf &
"Click [N]O to create a new file" & vbCrLf &
"Click [C]ANCEL to cancel the export process",
"PDF ALREADY EXISTS",
MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation, MessageBoxDefaultButton.Button2)
If Response = DialogResult.Yes Then
ExportFile.Delete()
ElseIf Response = DialogResult.No Then
ExportFile = New IO.FileInfo(Common.Utility.IncrementExistingFileName(Me.ExportPath))
Else
ExportFile = Nothing
End If
If Not ExportFile Is Nothing Then
Me.CrystalReport.ExportToDisk(ExportFormatType.PortableDocFormat, ExportFile.FullName)
End If
End If
End If
Return ExportFile
End Function
Private Sub ShowReport()
Dim ReportViewer As New frmReportPreview
With ReportViewer
.rptViewer.ReportSource = Nothing
.rptViewer.ReportSource = Me.CrystalReport
.WindowState = FormWindowState.Maximized
.rptViewer.RefreshReport()
' Set zoom level: 1 = Page Width, 2 = Whole Page, 25-100 = zoom %
.rptViewer.Zoom(1)
.rptViewer.Show()
.Show()
End With
End Sub
Private Sub EmailReport(ByRef ReportMail As System.Net.Mail.MailMessage)
Dim ReportAttachment As IO.FileInfo = ExportReport()
If Not ReportAttachment Is Nothing AndAlso ReportAttachment.Exists Then
ReportMail.Attachments.Add(New System.Net.Mail.Attachment(ReportAttachment.FullName))
If Utility.SendEmailMessage(ReportMail) Then
End If
End If
End Sub
Public Overloads Sub Dispose()
Me.CrystalReport.Dispose()
If Not Me.DocumentToPrint Is Nothing Then
Me.DocumentToPrint.Dispose()
End If
End Sub
#End Region
#Region "PRIVATE METHODS"
Private Sub Initialize()
Me.CrystalReport = Nothing
Me.CRReportFile = Nothing
Me.ExportPath = String.Empty
Me.ADODataSet = Nothing
Me.XMLDataSource = Nothing
Me.ReportParameters = New List(Of CRParameter)
Me.ReportFormulas = New List(Of CRFormula)
Me.SourceType = ReportSourceType.XML
Me.ReportOption = GenerateReportOption.None
End Sub
Private Sub PrepareReport()
If Not Me.CRReportFile Is Nothing Then
Me.CrystalReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
Me.CrystalReport.Load(Me.CRReportFile.FullName)
Me.CrystalReport.DataSourceConnections.Clear()
SetReportConnectionInfo()
Me.CrystalReport.Refresh()
Me.CrystalReport.ReportClientDocument.VerifyDatabase()
If Me.ReportFormulas.Count > 0 Then
For Each Formula As CRFormula In Me.ReportFormulas
Formula.UpdateFormulaField(Me.CrystalReport)
Next Formula
End If
If Me.ReportParameters.Count > 0 Then
For Each Parameter As CRParameter In Me.ReportParameters
Parameter.UpdateReportParameter(Me.CrystalReport)
Next Parameter
End If
End If
End Sub
Private Sub SetReportConnectionInfo()
If Me.SourceType = ReportSourceType.PostgreSQL Then
Dim CRDatabase As CrystalDecisions.CrystalReports.Engine.Database = Me.CrystalReport.Database
Dim CRTables As CrystalDecisions.CrystalReports.Engine.Tables = CRDatabase.Tables
Dim CRConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
With CRConnectionInfo
.DatabaseName = <DBNAME>
.ServerName = <HOSTNAME>
.UserID = Utility.GetDBUsername
.Password = Utility.GetDBPassword
End With
For Each CRTable As CrystalDecisions.CrystalReports.Engine.Table In CRTables
Dim CRTableLogonInfo As CrystalDecisions.Shared.TableLogOnInfo = CRTable.LogOnInfo
CRTableLogonInfo.ConnectionInfo = CRConnectionInfo
CRTable.ApplyLogOnInfo(CRTableLogonInfo)
Next CRTable
ElseIf Me.SourceType = ReportSourceType.ADODataSet Then
Dim CRDatabase As CrystalDecisions.CrystalReports.Engine.Database = Me.CrystalReport.Database
Dim CRTables As CrystalDecisions.CrystalReports.Engine.Tables = CRDatabase.Tables
For Each CRTable As CrystalDecisions.CrystalReports.Engine.Table In CRTables
For Each ADOTable As DataTable In ADODataSet.Tables
If CRTable.Name.ToUpper.Trim = ADOTable.TableName.ToUpper.Trim Then
CRTable.SetDataSource(ADOTable)
Exit For
End If
Next ADOTable
Next CRTable
ElseIf Me.SourceType = ReportSourceType.XML Then
If Not Me.XMLDataSource Is Nothing AndAlso Me.XMLDataSource.Exists Then
Dim CRDatabaseAttributes As New CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag
Dim CRLogonProperties As New CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag
Dim CRConnectionDetails As New CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo
Dim CRTable As CrystalDecisions.ReportAppServer.DataDefModel.Table
Dim CRTables As CrystalDecisions.ReportAppServer.DataDefModel.Tables = Me.CrystalReport.ReportClientDocument.DatabaseController.Database.Tables
Dim XMLData As New System.Data.DataSet
XMLData.ReadXml(Me.XMLDataSource.FullName)
With CRLogonProperties
.Add("File Path ", Me.XMLDataSource.FullName)
.Add("Internal Connection ID", "{be7cdac3-6a64-4923-8177-898ab55d0fa0}")
End With
With CRDatabaseAttributes
.Add("Database DLL", "crdb_adoplus.dll")
.Add("QE_DatabaseName", "")
.Add("QE_DatabaseType", "")
.Add("QE_LogonProperties", CRLogonProperties)
.Add("QE_ServerDescription", Me.XMLDataSource.Name.Substring(0, Me.XMLDataSource.Name.Length - Me.XMLDataSource.Extension.Length))
.Add("QE_SQLDB", "False")
.Add("SSO Enabled", "False")
End With
With CRConnectionDetails
.Attributes = CRDatabaseAttributes
.Kind = CrystalDecisions.ReportAppServer.DataDefModel.CrConnectionInfoKindEnum.crConnectionInfoKindCRQE
.UserName = ""
.Password = ""
End With
For I As Integer = 0 To XMLData.Tables.Count - 1
CRTable = New CrystalDecisions.ReportAppServer.DataDefModel.Table
With CRTable
.ConnectionInfo = CRConnectionDetails
.Name = XMLData.Tables(I).TableName
.QualifiedName = XMLData.Tables(I).TableName
.[Alias] = XMLData.Tables(I).TableName
End With
Me.CrystalReport.ReportClientDocument.DatabaseController.SetTableLocation(CRTables(I), CRTable)
Next I
End If
End If
End Sub
#End Region
End Class
CRParameter)#Region "CRYSTAL REPORTS PARAMETER CLASS"
Public Class CRParameter
Public Property ParameterName As String
Public Property ParameterValue As Object
Public Sub New(ByVal CurrentParameterName As String, ByVal CurrentParameterValue As Object)
Me.ParameterName = CurrentParameterName
Me.ParameterValue = CurrentParameterValue
End Sub
Friend Sub UpdateReportParameter(ByRef CurrentReport As CrystalDecisions.CrystalReports.Engine.ReportDocument)
If Not CurrentReport Is Nothing Then
If Not String.IsNullOrEmpty(Me.ParameterName) Then
Using ReportFieldDefinitions As ParameterFieldDefinitions = CurrentReport.DataDefinition.ParameterFields
Using ReportParameter As ParameterFieldDefinition = ReportFieldDefinitions.Item(Me.ParameterName)
Dim ReportValues As ParameterValues = ReportParameter.CurrentValues
Dim NewValue As New ParameterDiscreteValue
ReportValues.Clear()
NewValue.Description = Me.ParameterName
NewValue.Value = Me.ParameterValue
ReportValues.Add(NewValue)
ReportParameter.ApplyCurrentValues(ReportValues)
ReportParameter.ApplyDefaultValues(ReportValues)
End Using
End Using
End If
End If
End Sub
End Class
#End Region
CRFormula)#Region "CRYSTAL REPORTS FORMULA VALUE CLASS"
Public Class CRFormula
Public Property FormulaName As String
Public Property FormulaValue As Object
Public Sub New(ByVal NewFormulaName As String, ByVal NewFormulaValue As Object)
Me.FormulaName = NewFormulaName
Me.FormulaValue = NewFormulaValue
End Sub
Friend Sub UpdateFormulaField(ByRef CurrentReport As CrystalDecisions.CrystalReports.Engine.ReportDocument)
If Not CurrentReport Is Nothing Then
If Not String.IsNullOrEmpty(Me.FormulaName) Then
Try
If Me.FormulaValue Is Nothing Then
Me.FormulaValue = ""
CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
ElseIf TypeOf Me.FormulaValue Is String AndAlso String.IsNullOrEmpty(Convert.ToString(Me.FormulaValue)) Then
Me.FormulaValue = ""
CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
ElseIf TypeOf Me.FormulaValue Is String AndAlso Not String.IsNullOrEmpty(Convert.ToString(Me.FormulaValue)) Then
Me.FormulaValue = "'" & Me.FormulaValue.ToString & "'"
CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
ElseIf TypeOf Me.FormulaValue Is Date Then
Me.FormulaValue = "'" & Convert.ToDateTime(Me.FormulaValue).ToString("yyyy-MM-dd") & "'"
CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
Else
CurrentReport.DataDefinition.FormulaFields(Me.FormulaName).Text = Me.FormulaValue.ToString
End If
Catch ex As Exception
End Try
End If
End If
End Sub
End Class
#End Region