I'm looking for a free, portable C or C++ library which allows me to play mono sound samples on specific channels in a 5.1 setup. For example the sound should be played with the left front speaker whereby all other speakers remain silent. Is there any library capable of doing this?
I had a look at OpenAL. However, I can only specify the position from which the sound should come, but it seems to me that I cannot say something like "use only the front left channel to play this sound".
Any hints are welcome!
I had a look at OpenAL. However, I can only specify the position from which the sound should come, but it seems to me that I cannot say something like "use only the front left channel to play this sound".
I don't think this is quite true. I think you can do it with OpenAL, although it's not trivial. OpenAL only does the positional stuff if you feed it mono format data. If you give it stereo or higher, it plays the data the way it was provided. However, you're only guaranteed stereo support. You'll need to check to see if the 5.1 channel format extension is available on your system (AL_FORMAT_51CHN16). If so, then, I think that you feed your sound to the channel you want and feed zeroes to all the others channels when you buffer the samples. Note that you need hardware support for this on the sound card. A "generic software" device won't cut it.
See this discussion from the OpenAL mailing list.
Alternatively, I think that PortAudio is Open, cross-platform, and supports multiple channel output. You do still have to interleave the data so that if you're sending a sound to a single channel, you have to send zeroes to all the others. You'll also still need to do some checking when opening a stream on a device to make sure the device supports 6 channels of output.