I have a mosquitto broker run on a linux behind my company proxy. I have been configured a bridge to AWS same following: (mosquitto.conf)
connection bridge
address ec2-xxx-xxx-xxx-xxx.ap-northeast-1.compute.amazonaws.com:8089
remote_username admin
remote_password password
topic abc/raspi01 both 0
bridge_cafile /etc/pki/tls/certs/nginx-selfsigned.crt
bridge_insecure false
But when I start mosquitto service with command:
service mosquitto restart
In log file, There are some errors:
1554356888: mosquitto version 1.5.5 starting
1554356888: Config loaded from /etc/mosquitto/mosquitto.conf.
1554356888: Opening ipv4 listen socket on port 1883.
1554356888: Opening ipv6 listen socket on port 1883.
1554356888: Warning: Address family not supported by protocol
1554356888: Connecting bridge bridge (ec2-xxx-xxx-xxx-xxx.ap-northeast-1.compute.amazonaws.com:8089)
1554356888: Error creating bridge: Name or service not known.
1554356888: Warning: Unable to connect to bridge bridge.
1554356901: New connection from 127.0.0.1 on port 1883.
1554356901: New connection from 127.0.0.1 on port 1883.
1554356901: New client connected from 127.0.0.1 as mqtt_fd05fada.b70918 (c1, k60).
1554356901: New client connected from 127.0.0.1 as mqtt_2a3a025d.6c941e (c1, k60).
1554356919: Connecting bridge bridge (ec2-xxx-xxx-xxx-xxx.ap-northeast-1.compute.amazonaws.com:8089)
1554356919: Error creating bridge: Name or service not known.
1554356950: Connecting bridge bridge (ec2-xxx-xxx-xxx-xxx.ap-northeast-1.compute.amazonaws.com:8089)
1554356950: Error creating bridge: Name or service not known.
I things the cause is my company proxy. I have tried with settings in mosquitto.service, but it not resolve.
[Unit]
Description=Mosquitto MQTT v3.1/v3.1.1 Broker
Documentation=man:mosquitto.conf(5) man:mosquitto(8)
After=network-online.target
Wants=network-online.target
[Service]
Type=notify
NotifyAccess=main
ExecStart=/usr/sbin/mosquitto -c /etc/mosquitto/mosquitto.conf
Environment="HTTPS_PROXY=http://user:pass@proxyhost:8800"
Environment="HTTP_PROXY=http://user:pass@proxyhost:8800"
Environment="NO_PROXY=127.0.0.1,localhost"
Restart=on-failure
[Install]
WantedBy=multi-user.target
Can any body help me? Thank so much.
You can not use a HTTP proxy for MQTT bridge connection (or any native MQTT connection). MQTT is a totally different protocol.
Only MQTT over Websockets would work via a HTTP proxy, but you can not configure mosquitto to run a bridge with MQTT over Websockets.