xilinxvivadozynqaxi4
Vivado, Zynq, BRAM Controller, Narrow AXI burst option
Consider a simple system with PS (Processor system) with enabled AXI3 Master, connected to AXI4 Interconnect connected to BRAM Controller that has access to BRAM memory.
What is the meaning of AXI Narrow Bursts? How do i define or consider what is narrow burst? Can i control whether I want a narrow burst or not?
Solution
Narrow burst allows transfer of data smaller than the data bus width. The main use use to allow slave devices of differing bus widths, or requests of a smaller width, to to communicate with the master.
Please see AXI4 (Lite) Narrow Burst vs. Unaligned Burst Clarification/Compatibility The accepted answer gives a good description.
- Xilinx Vivado 2023 IP block design issue: Unable to connect output of RTL module to AXI GPIO output that is connected to LED
- Where to force xilinx ISE to use block-rams?
- Is CRC Calculation Faster on Xilinx Alveo U280 FPGA Using a Custom Algorithm or a Lookup Table?
- How to implement pipelined floating point accumulation in II=1 in Vitis/Vivado HLS?
- Timing simulation in Vivado giving an error
- Is it possible to tie ports high always high outside of top module?
- How to fix [Common 17-1293] error in Xilinx Vivado?
- How to initialize contents of inferred Block RAM (BRAM) in Verilog
- Implementing hardware that divides an 8 bit number by 3 (11) in binary
- Can SYSCLK be included in FPGA Xilinx vivado testbenches?
- Isim not running
- how to add python in xilinx vitis
- Timing closure problems in FIFO
- Xilinx Vivado schematic for if else statements
- difference between Xilinx solarflare scaleout onlod, solarflare onload, and solarflare TCPDirect?
- Inferring a True Dual Port RAM (Xilinx and Intel compatible) in Verilog
- 'case item is unreachable' in Vivado synthesis process
- Why does the Inferred Latch error occur during the synthesis process?
- What is the granularity of the AXI-ACE protocol?
- Restricting Verilog parameters
- Vitis HLS Pointer to Pointer is not supported for variable when initializing struct array
- Vitis PetaLinux build cant fetch required files while building an application project
- Address of a struct used to set MSI Base address, how does it work? (in Xilinx PCIe RC driver)
- How To Convert .bit file to .bin
- of_node_name_eq for device tree node label
- using xilinx cores in modelsim via .do file
- Add hwspinlock Linux Driver to Petalinux project
- How to use XADC's GPIO on Xilinx KC705 FPGA
- Need help in converting verilog module without input & output ports into synthesizable. Because module without input/output ports is not synthesizable
- Windows driver API that enables multi-word read/write