Lately I have been thinking about investing in a worthy USB pen drive (something along the lines of this), and install Operating Systems on Virtual Machines and start developing on them.
What I have in mind is that I want to be able to carry my development boxes, being a Windows Distribution for .Net development and a Linux Distribution for stuff like RoR, Perl and whatnot, so that I would be able to carry them around where need be...be it work, school, different computers at home etc...
I am thinking of doing this also for backup purposes...ie to backup my almost-single VM file to an external hd, instead of doing routinely updates to my normal Windows Box. I am also thinking about maybe even committing the VM boxes under Source Control (is that even feasible?)
So, am I on the right track with this ? Do you suggest that I try to implement this out?
How feasible is it to have your development box on Virtual Machine that runs from a USB Pen-Drive ?
I absolutely agree with where you are heading. I wish to do this myself.
But if you don't already know, it's not just about drive size, believe it or not USB Flash drives can be much slower than your spinning disk drives!
This can be a big problem if you plan to actually run the VMs directly from the USB drive!
I've tried running a 4GB Windows XP VM on a 32GB Corsair Survivor and the VM was virtually unusuable! Also copying my 4GB VM off and back onto the drive was also quite slow - about 10 minutes to copy it onto the drive.
If you have an esata port I'd highly recommend looking at high-speed ESata options like this Kanguru 32GB ESata/USB Flash drive OR this 32GB one by OCZ.
The read and write speeds of these drives are much higher over ESata than other USB drives. And you can still use them as USB if you don't have an ESata port. Though if you don't have an ESata port you can buy PCI to ESata cards online and even ESata ExpressCards for your laptop.
EDIT: A side note, you'll find the USB flash drives use FAT instead of NTFS. You don't want to use NTFS because it makes a lot more reads & writes on the disk and your drive will only have a limited number of reads & writes before it dies. But by using FAT you'll be limited to max 2GB file size which might be a problem with your VM. If this is the case, you can split your VM disks into 2GB chunks. Also make sure you backup your VM daily incase your drive does reach it's maximum number of writes. :)