Integration of Shenzhen Concox Information Technology Tracker GT06 with EC2

Question

I have a concox GT06 device from which I want to send tracking data to my AWS Server.

The coding protocol manual that comes with it only explains the data structure and protocol.

How does my server receive the GPS data collected by my tracker?

Answer 1

1. Verify if your server allows you to open sockets, which most low cost solutions do NOT allow for security reasons (i recommend using an Amazon EC2 virtual machine as your platform).
2. Choose a port on which your application will listen to incoming data, verify if it is open (if not open it) and code your application (i use C++) to listen to that port.
3. Compile and run your application on the server (and make sure that it stays alive).
4. Configure your tracker (usually by sending an sms to it) to send data to your server's IP and to the port which your application is listening to.

If you are, as i suspect you are, just beginning, consider that you will invest 2 to 3 weeks to develop this solution from scratch. You might also consider looking for a predeveloped tracking platform, which may or may not be acceptable in terms of data security.

You can find examples and tutorials online. I am usually very open with my coding and would gladly send a copy of the socket server, but, in this case, for security reasons, i cannot do so.