crc_table = None
def make_crc_table():
global crc_table
crc_table = [0] * 256
for n in xrange(256):
c = n
for k in xrange(8):
if c & 1:
c = 0xedb88320L ^ (c >> 1)
else:
c = c >> 1
crc_table[n] = c
make_crc_table()
"""
/* Update a running CRC with the bytes buf[0..len-1]--the CRC
should be initialized to all 1's, and the transmitted value
is the 1's complement of the final running CRC (see the
crc() routine below)). */
"""
def update_crc(crc, buf):
c = crc
for byte in buf:
c = crc_table[int((c ^ ord(byte)) & 0xff)] ^ (c >> 8)
return c
# /* Return the CRC of the bytes buf[0..len-1]. */
def crc(buf):
return update_crc(0xffffffffL, buf) ^ 0xffffffffL
I used this code to calculate png crc value
My IHDR chunk data is 000008A0 000002FA 08020000 00 and the result of that code was 0xa1565b1L
However real crc was 0x84E42B87. I checked this value with well known png checker tool and correct crc was 0x84E42B87.
I can't understand how this value is calculated and correct value.
The CRC is calculated over the chunk type and the data, not just the data. So those bytes would be preceded by the four bytes IHDR. Then you get the correct CRC.
As an aside, I have no idea how you got 0xa1565b1L from 000008A0 000002FA 08020000 00. I get 0xa500050a as the CRC of those bytes. There must be something else that you're doing wrong as well. You would need to provide a complete example for us to be able to tell.