I am trying to create a MediaServer UPNP program in order to stream video from my phones camera to my PC. I used Intel device spy to send an M-SEARCH request and used Wireshark to capture the network packets.
Here is the M-SEARCH packet
(Src: 192.168.1.28, Dst: 239.255.255.250; Src Port: 50852, Dst Port: 1900, time 2.09)
M-SEARCH * HTTP/1.1
ST: upnp:rootdevice
MAN: "ssdp:discover"
MX: 5
HOST: 239.255.255.250:1900
Here is the UDP reply
(Src: 192.168.1.23, Dst: 192.168.1.28; Src Port: 53359, Dst Port: 50852)
HTTP/1.1 200 OK
CACHE-CONTROL: max-age=1810
DATE: Wed, 1 Feb 2017 02:07:36 GMT
EXT:
LOCATION: http://192.168.1.23:49156/details.xml
SERVER: Linux/2.x.x, UPnP/1.0, pvConnect UPnP SDK/1.0, TwonkyMedia UPnP SDK/1.1
ST: upnp:rootdevice
USN: uuid:3d64febc-ae6a-4584-853a-85368ca80800::upnp:rootdevice
Content-Length: 0
I do not get a following HTTP GET request to 192.168.1.23. I compared it to other UPNP device responses that worked and could see no difference. I tried different source ports but with no sucess. Any ideas?
@simonc, Thank you. I did have a \r\n at the end of my message, but I added another one (to the NOTIFY message as well) and now I can see my device.