Search code examples
androidadbscreencast

Use adb screenrecord command to mirror Android screen to PC via USB

I've tried the suggestion from fadden to mirror the Android screen to PC, but the vlc player screen show nothing:

enter image description here

What would be the correct commands lines for this function? Thanks.

Solution

  • I don't remember the vlc command line that I used for the initial testing. I've tried a few different things recently, on desktop Linux (Ubuntu 15.10).

    VLC

    If you just pipe the output into vlc --demux h264 -, it appears to work, but you get gradually farther behind. Adding --h264-fps=60 seems to help that, but you start getting errors ("ES_OUT_SET_(GROUP_)PCR is called too late"). Adding --clock-jitter=0 seems to make the errors less traumatic, but it's still pretty messed up.

    ffplay

    A simple ffplay - works, but it seems to take a few seconds to decide to start, and ends up lagging well behind the entire time.

    Update - January 2018

    Using ffplay -framerate 60 -framedrop -bufsize 16M - gives you a decent quality that lasts for quite a while. This is due to the below command that synchronises the framerate and bitrate as the video will otherwise be trying to play at 30fps making everything look/get slower over time due to the extra frames. The bitrate will then help keep the video properly timed as best as possible. I've found it works within a 100-1000MS delay; similarly to most Bluetooth headsets. You might get a "consider increasing probesize" error that may freeze the stream. It's best to restart screenrecord or try appending -probesize 16M

    Note: This configuration with ffplay works with the following adb command piped beforehand. If you're running GPU intensive tasks or using an older phone, a size of 1280x720 is a better recommendation. If your phone doesn't support 60fps (or doesn't seem to record in 60fps) change until appropriate with values such as 30 or 24.

    adb exec-out screenrecord --bit-rate=16m --output-format=h264 --size 1920x1080 -

    mplayer

    The command mplayer -demuxer h264es - seems to yield the best results. Starts immediately, very little delay, and doesn't freak out like vlc.