Search code examples
linuxraspberry-pikernelboot

NOOBS installed, but not booting properly with Kernel Panic Error Code 0x00000004"

I downloaded latest NOOBS v1.9.2 from raspberry site.

Installed it on RaspberryPi 2 Box.

It installed successfully.

I did integrate some files in NOOBS and did re-build it. (re-created NOOBS)

The newly created NOOBS works on Raspberry 2 and Raspberry 3, but it does not work with Raspberry 1.

It is successfully installed on RaspberryPi 1 but while booting it provides below error.

Kernel panic - not syncing : Attempted to kill init! exitcode=0x00000004
CPU: 0 PID: 1 Comm: Init Not tainted 4.4.11+ #888

I have tried below :

(1) update kernel and firmware using command:

"rpi-update" command.

(2) update broken packages using command :

"apt-get -f install"

(3) get latest update command :

"apt-get update'

(4) Re-installed boot loader using below command

Command : sudo apt-get install --reinstall raspberrypi-bootloader

This problem looks like, the kernel is not able to compile some files to machine level code.

I have also attached the image of the occured error :enter image description here

Solution

  • I solved this problem as below :

    • Install original NOOBS on RaspberryPi 1 instead of Raspberry Pi 2 or 3.
    • Now change its settings according to requirement.
    • Build it and re-create the NOOBS.
    • Now check the installation of re-created NOOBS on RPI1, 2 and 3. it will work on all 3.

    Actually, from this I understood that the environment of RPI1 is compatible with RPI2 and RPI3.