I'm trying to clone a bitbucket repo in AWS ec2. But its not working. and not giving any error message.
It's only giving message is
Cloning into 'repo_name'...
I have also tried telnet command.
telnet bitbucket.org 443
But it also showing message
Trying 104.192.143.3...
Trying 104.192.143.1...
Trying 104.192.143.2...
telnet: Unable to connect to remote host: Connection timed out
I have seen security group that has been assigned to this ec2.
Inbound
HTTP TCP 80 0.0.0.0/0
SSH TCP 22 0.0.0.0/0
Outbound
All traffic All All 0.0.0.0/0
When I ping www.google.com its giving
PING www.google.com (216.58.196.68) 56(84) bytes of data.
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=1 ttl=55 time=9.41 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=2 ttl=55 time=9.21 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=3 ttl=55 time=9.23 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=4 ttl=55 time=9.32 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=5 ttl=55 time=9.17 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=6 ttl=55 time=9.12 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=7 ttl=55 time=9.26 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=8 ttl=55 time=9.29 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=9 ttl=55 time=9.24 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=10 ttl=55 time=9.40 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=11 ttl=55 time=9.12 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=12 ttl=55 time=9.57 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=13 ttl=55 time=9.22 ms
64 bytes from kul01s09-in-f4.1e100.net (216.58.196.68): icmp_seq=14 ttl=55 time=9.16 ms
Allow HTTPS in Inbound as it is suggested do.
http://docs.aws.amazon.com/AmazonVPC/latest/UserGuide/VPC_Appendix_NACLs.html
Also if this does not work try using an Elastic IP