I'm trying to automate the installation of Hyperic using puppet.
However instead of prompting the user for inputs, I want to hard code the values into one of the .sh file...
I'm having trouble trying to figure out what file should be edited?
So, I've automated the installation of Hyperic with Puppet at some point, I'll see if I can open source the module in the future.
But the gist of it, is that you need config for everything in the agent.properties file, then that's read when the /opt/hyperic/hyperic-hqee-agent/bin/hq-agent.sh start command is run for the first time.
Something like this:
$server_ip = 'hypericserver.example.com'
$server_port = '7080'
$ssl_port = '7443'
$secure = 'no'
$login = 'hqadminuser'
$password = 'password1'
$agent_ip = '*default*'
$agent_port = '*default*'
$resetup_tokens = 'no'
$accept_unverified = 'no'
$unidirectional = 'yes'
file { "/opt/hyperic/hyperic-hqee-agent/conf/agent.properties":
ensure => file,
mode => '0640',
content => template('hyperic/agent.properties.erb'),
}
With the template looking something like:
# Agent configuration file
#
# The following are the properties that the Agent recognizes:
#
# agent.listenPort
# Default: "2144"
#
# Description: Port that the agent listens on.
#
# agent.listenIp
# Default: "*"
#
# Description: Address that the agent listens on. If set to '*',
# the agent will listen on all available interfaces.
#
# agent.startupTimeOut
# Default: "300"
#
# Description: This is the number of seconds that the agent startup
# script will wait before determining that the agent
# did not startup successfully.
#
# agent.maxBatchSize
# Default: "500"
#
# Description: This is the maximum number of metrics that the
# agent will send per contact with HQ.
#
#
# agent.eventReportBatchSize
# Default: "100"
#
# Description: The agent will send events to HQ in reports containing
# at most this number of events until all events have been
# sent to HQ.
#
#
# agent.proxyHost
# Default: none
#
# Description: The host name or IP address of the proxy server that the
# agent must connect to first when establishing a connection
# to the HQ server.
#
#
# agent.proxyPort
# Default: none
#
# Description: The port number of the proxy server that the agent
# must connect to first when establishing a connection to
# the HQ server.
#
#
# agent.enabledCiphers
# Default: SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA,SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_DSS_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_DSS_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA
#
# Description: The ciphers supported for secured communication with the agent.
#
## Use the following if you'd like to have the agent setup
## automatically from these properties. The values for these
## properties are used to answer the setup questions
##
## If any of these properties are left undefined, the setup
## process will prompt for their values
##
## If the value that should be used is the default when interactive
## setup is done, use the string *default* as the value for the option
agent.setup.camIP=<%= @server_ip %>
agent.setup.camPort=<%= @server_port %>
agent.setup.camSSLPort=<%= @ssl_port %>
agent.setup.camSecure=<%= @secure %>
agent.setup.camLogin=<%= @login %>
agent.setup.camPword=<%= @password %>
agent.setup.agentIP=<%= @agent_ip %>
agent.setup.agentPort=<%= @agent_port %>
agent.setup.resetupTokens=<%= @resetup_tokens %>
agent.setup.acceptUnverifiedCertificate=<%= @accept_unverified %>
##
## enables unidirectional communications between HQ Agent
## and HQ Server in HQ Enterprise Edition
##
agent.setup.unidirectional=<%= @unidirectional %>
##
## the custom keystore private key alias for the agent
## used for unidirectional agents with a custom keystore
##
#agent.keystore.alias=hq
# required to find server/lib/weblogic.jar
#weblogic.installpath=/usr/local/bea/weblogic-8.1
# required to find websphere jars
#websphere.installpath=/opt/WebSphere/AppServer
# required to find jboss jars
#jboss.installpath=/usr/local/jboss-4.0.0
# mirror /proc/net/tcp on linux
sigar.mirror.procnet=true
##
## Logging settings
##
agent.logFile=${agent.logDir}/agent.log
agent.logLevel=INFO
log4j.rootLogger=${agent.logLevel}, R
log4j.appender.R.File=${agent.logFile}
log4j.appender.R.MaxBackupIndex=1
log4j.appender.R.MaxFileSize=5000KB
log4j.appender.R.layout.ConversionPattern=%d{dd-MM-yyyy HH:mm:ss,SSS z} %-5p [%t] [%c{1}@%L] %m%n
log4j.appender.R.layout=org.apache.log4j.PatternLayout
log4j.appender.R=org.apache.log4j.RollingFileAppender
#redirect System.{err,out} to agent.log
#commenting out will leave System.{out,err} directed to agent.log.startup
agent.logLevel.SystemErr=ERROR
agent.logLevel.SystemOut=INFO
##
## Disable overly verbose logging
##
log4j.logger.org.apache.http=ERROR
log4j.logger.org.springframework.web.client.RestTemplate=ERROR
log4j.logger.org.hyperic.hq.measurement.agent.server.SenderThread=INFO
log4j.logger.org.hyperic.hq.agent.server.AgentDListProvider=INFO
log4j.logger.org.hyperic.hq.agent.server.MeasurementSchedule=INFO
log4j.logger.org.hyperic.util.units=INFO
log4j.logger.org.hyperic.hq.product.pluginxml=INFO
log4j.logger.org.hyperic.hq.agent.server.CommandListener=INFO
log4j.logger.org.hyperic.util.security.DbKeyStore=INFO
log4j.logger.org.hyperic.util.security.MarkedStringEncryptor=INFO
log4j.logger.org.hyperic.hq.stats.AbstractStatsWriter=INFO
# Only log errors from naming context
log4j.category.org.jnp.interfaces.NamingContext=ERROR
log4j.category.org.apache.axis=ERROR
#Agent Subsystems: Uncomment individual subsystems to see debug messages.
#-----------------------------------------------------------------------
#log4j.logger.org.hyperic.hq.autoinventory=DEBUG
#log4j.logger.org.hyperic.hq.livedata=DEBUG
#log4j.logger.org.hyperic.hq.measurement=DEBUG
#log4j.logger.org.hyperic.hq.control=DEBUG
#Agent Plugin Implementations
#log4j.logger.org.hyperic.hq.product=DEBUG
#Server Communication
#log4j.logger.org.hyperic.hq.bizapp.client.AgentCallbackClient=DEBUG
#Server Realtime commands dispatcher
#log4j.logger.org.hyperic.hq.agent.server.CommandDispatcher=DEBUG
#Agent Configuration parser
#log4j.logger.org.hyperic.hq.agent.AgentConfig=DEBUG
#Agent plugins loader
#log4j.logger.org.hyperic.util.PluginLoader=DEBUG
#Agent Metrics Scheduler (Scheduling tasks definitions & executions)
#log4j.logger.org.hyperic.hq.agent.server.session.AgentSynchronizer.SchedulerThread=DEBUG
#Agent Plugin Managers
#log4j.logger.org.hyperic.hq.product.MeasurementPluginManager=DEBUG
#log4j.logger.org.hyperic.hq.product.AutoinventoryPluginManager=DEBUG
#log4j.logger.org.hyperic.hq.product.ConfigTrackPluginManager=DEBUG
#log4j.logger.org.hyperic.hq.product.LogTrackPluginManager=DEBUG
#log4j.logger.org.hyperic.hq.product.LiveDataPluginManager=DEBUG
#log4j.logger.org.hyperic.hq.product.ControlPluginManager=DEBUG
#--------------------------------------------------------------------------------------
##
## Auto-inventory options
##
#autoinventory.defaultScan.interval.millis=86400000
autoinventory.runtimeScan.interval.millis=86400000
##
## Disable deprecated response time feature by default
##
hq.plugins.responsetime.disable=true
##
## SSL settings
##
## The path and password to the keystore file. This is for setting up the SSL
## port on the agent. Use it only if you'd like to use your existing keystore.
## The path should be a absolute path.
##
# agent.keystore.path=
# agent.keystore.password=
##
## Automatically accept unverified certificates
accept.unverified.certificates=false
##
## Configuration Monitoring settings
##
# max diff size - default 5 Mb.
hq.plugins.configmon.maxdiff=5120
## define vsphere plugin thread size (default is 1)
scheduleThread.poolsize.vsphere=2
#should the agent deduct the time offset of the server when sending metric results
agent.deductServerTimeDiff=true