I've tried to build OpenCV on Raspberry Pi 2 with TBB,I've installed TBB from source on the Pi,I've specified the path to to TBB libs to cmake config but I'm getting the error:
/home/mihai/tbb43_20150316oss/include/tbb/machine/gcc_armv7.h:31:2: error: #error compilation requires an ARMv7-a architecture.
I think the error is because in the OpenCV makefile i have to include the flag for ARMv7
-DTBB_USE_GCC_BUILTINS=1 -D__TBB_64BIT_ATOMICS=0
The problem is that I don't know where to include it.Has anyone had this problem abd want to share a solution?
I have resolved it :D .For those having this problem follow these steps:
1.Go to file gcc_armv7.h line 31 and comment lines
30 #if !(__ARM_ARCH_7A__)
31 #error compilation requires an ARMv7-a architecture.
32 #endif
2.Next in the same file gcc_armv7.h go to line 56 and replace it with
56 #define __TBB_full_memory_fence() 0xffff0fa0 // __asm__ __volatile__("dmb ish": : :"memo ry")
For those who want an explanation how I did it, after the first step I get the following errors :
/tmp/ccnkbkfd.s:313: Error: selected processor does not support ARM mode `dmb ish'
/tmp/ccnkbkfd.s:386: Error: selected processor does not support ARM mode `dmb ish'
/tmp/ccnkbkfd.s:533: Error: selected processor does not support ARM mode `dmb ish'
/tmp/ccnkbkfd.s:562: Error: selected processor does not support ARM mode `dmb ish'
After I have searched on google and found this :
The alternative for using dmb is to call the Linux kernel __kuser_memory_barrier
the __kuser_memory_barrier helper operation is found in all ARM kernels 2.6.15 and later
and provide a way to issue a memory barrier that will work across all ARM arch.__kuser_memory_barrier
helper function found at address 0xffff0fa0