Search code examples
androidlinuxusbadbtethering

Reverse tethering of several Android devices via USB

I'm trying to setup a testing environment for my android app where the separate devices need an Internet connection, but don't have wireless capabilities.

So I decided on using usb reverse tethering. My host machine is running Ubuntu. I already managed to setup reverse tethering for one device, the connection is working and I can ping google.com from this device's adb shell.

When I connect a second device, the first tethering stops working. Both devices have the same IP adress configured on their internal usb0 interface.

Here's what I have so far:

  1. Port forwarding on host is activated

    echo 1 > /proc/sys/net/ipv4/ip_forward

  2. Iptables rule on host to route traffic:

    iptables -t nat -A POSTROUTING -s 169.254.255.2/24 -j MASQUERADE

  3. Plugin first device:

    ifconfig shows the device on usb0 @ ip 169.254.255.2/30

  4. On first device (with adb shell)

    > route add default gw 169.254.255.2 dev usb0
> setprop net.dns1 8.8.8.8
> ping google.com --> is giving results

  5. Plugin second device

    ifconfig shows this device on usb1 @ ip 169.254.255.2/30

  6. On second device 

    Add gw, set DNS like above

Now the second device can ping google.com, but the first one not.

When I change the internal IP or the IPs assigned to the hosts usb0, usb1 interfaces I am not able to connect to the devices via adb anymore.

I suspect this to be a networking problem, rather than a problem with ADB? Any Ideas?

Solution

  • After a lot of googling and trial and error I finally found the solution for my particular setup.

    What I did in the end, and what I missed in my first attempts, was to put each connected usb device into a separate subnet (see this answer on serverfault).

    To put it clearly, the setup is now like following:

    1. iptables contains the following rule

      iptables -t nat -A POSTROUTING -j MASQUERADE

    2. the host's usb0 and usb1 interface, now in separate subnets

      usb0: inet addr:169.254.0.1  Bcast:169.254.15.255  Mask:255.255.240.0
usb1: inet addr:169.254.16.1  Bcast:169.254.31.255  Mask:255.255.240.0

    3. internal usb0 iface of Android device connected on host's usb0:

      - usb0 169.254.0.2/20
- default gw 169.254.0.1 (so the host's usb0 iface)

    4. internal usb0 iface of Android device connected on host's usb1:

      - usb0 169.254.16.2/20
- default gw 169.254.16.1 (so the host's usb1 iface)

    That way I now have Internet access (after adb shell setprop net.dns1 8.8.8.8) from each android device connected to the usb interfaces on my host.