I have a specific label that feeds a second, blank label after printing a good one. I'd imagine it's something about the ZPL code, but I cannot seem to isolate it. I've tried removing each formatting statement at the top, one at a time and trying different values for each one. I've also re-calibrated even though other labels print just fine. Any ideas?
~JO
^XA
^PMN
^MNY
^MMR
^MTT
^MD0
^LH0,0
^LL1219
^PR4
^JMA
^FO0,398^FR^GB811,2,2^FS
^FO406,0^FR^GB2,236,2^FS
^FO0,606^FR^GB811,2,2^FS
^FO455,234^FR^GB2,165,2^FS
^FO0,843^FR^GB811,2,2^FS
^FO2,232^FR^GB811,2,2^FS
^FO412,604^FR^GB2,240,2^FS
^FO41,41^CI0^ADN,18,20^FR^FDFrom:^FS
^FO427,41^CI0^ADN,18,20^FR^FDTo:^FS
^FO41,264^BY2,2.0,102^B3N,N,102,N,N^FR^FD^FS
^FO22,248^CI0^A0N,17,17^FR^FDOrder Number:^FS
^FO463,238^CI0^ADN,18,20^FR^FDCarrier:^FS
^FO488,264^CI0^A0N,23,23^FR^FD^FS
^FO22,412^CI0^ABN,22,14^FR^FDORDER#^FS
^FO49,443^CI0^A0N,28,56^FR^FD^FS
^FO41,61^CI0^A0N,23,23^FR^FDRandom Address^FS
^FO41,102^CI0^A0N,23,23^FR^FDOne Industrial Rd^FS
^FO41,122^CI0^A0N,23,23^FR^FDSuite 199^FS
^FO41,142^CI0^A0N,23,23^FR^FDThistown, PA 12345^FS
^FO20,508^CI0^ABN,11,14^FR^FDP.O.#^FS
^FO366,508^CI0^ABN,11,14^FR^FDSHIP DATE^FS
^FO20,526^CI0^ABN,11,14^FR^FD^FS
^FO370,524^CI0^ABN,11,14^FR^FD05/15/14^FS
^FO421,614^CI0^ADN,18,20^FR^FDFOR:^FS
^FO427,691^CI0^A0N,23,23^FR^FD^FS
^FO427,711^CI0^A0N,23,23^FR^FD^FS
^FO427,650^CI0^A0N,23,23^FR^FD^FS
^FO163,914^BY2,3.0,203^B3N,N,203,N,N^FR^FDRC051514E^FS
^FO45,862^CI0^ADN,18,20^FR^FDRC051514E^FS
^FO427,61^CI0^A0N,23,23^FR^FD^FS
^FO427,102^CI0^A0N,23,23^FR^FD^FS
^FO427,122^CI0^A0N,23,23^FR^FD^FS
^FO427,142^CI0^A0N,23,23^FR^FD^FS
^FO549,610^CI0^A0N,17,17^FR^FDCUST NO:^FS
^FO650,610^CI0^A0N,17,17^FR^FD^FS
^FO345,406^CI0^A0N,39,78^FR^FDPQ^FS
^FO447,406^CI0^A0N,39,78^FR^FD1^FS
^FO650,142^CI0^A0N,23,23^FR^FD,^FS
^FO671,142^CI0^A0N,23,23^FR^FD^FS
^FO711,142^CI0^A0N,23,23^FR^FD^FS
^FO427,732^CI0^A0N,23,23^FR^FD^FS
^FO650,732^CI0^A0N,23,23^FR^FD,^FS
^FO671,732^CI0^A0N,23,23^FR^FD^FS
^FO711,732^CI0^A0N,23,23^FR^FD^FS
^PQ1
^XZ
I ended up spending an hour and a half on the phone with Zebra and they determined that since my printer model was emulating ZPL support I had to be much more careful about the order of the statements by coordinates. In other words, Zebra models with ZPL emulation cannot deal with it when a statement has a x and y coordinates that would make it precede a line already done. It will print but cause weird things like page feeds to happen. So make sure to put all of your lines in order, even if you generate your code using software like LabelViewer.