Search code examples
sshvagrantvirtualboxprivate-keyvagrantfile

Vagrant ssh authentication failure

The problem with ssh authentication:

==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: bridged
==> default: Forwarding ports...
    default: 22 => 2222 (adapter 1)
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Error: Connection timeout. Retrying...
    default: Error: Connection timeout. Retrying...
    default: Error: Connection timeout. Retrying...
    default: Error: Connection timeout. Retrying...
    default: Error: Authentication failure. Retrying...
    default: Error: Authentication failure. Retrying...
    default: Error: Authentication failure. Retrying...
    default: Error: Authentication failure. Retrying...
    default: Error: Authentication failure. Retrying...

I can Ctrl+C out of the authentication loop and then successfully ssh in manually.

I performed the following steps on the guest box:

  • Enabled Remote Login for All Users.

  • Created the ~/.ssh directory with 0700 permissions.

  • Created the ~/.ssh/authorized_keys file with 0600 permissions.

  • Pasted this public key into ~/.ssh/authorized_keys

I've also tried using a private (hostonly) network instead of the public (bridged) network, using this line in the Vagrantfile:

config.vm.network "private_network", ip: "172.16.177.7"

I get the same output (except Adapter 2: hostonly) but then cannot ssh in manually.

I also tried config.vm.network "private_network", ip: "10.0.0.100".

I also tried setting config.ssh.password in the Vagrantfile. This does output SSH auth method: password but still doesn't authenticate.

And I also tried rebuilding the box and rechecking all the above.

It looks like others have had success with this configuration, so there must be something I'm doing wrong.

I found this thread and enabled the GUI, but that doesn't help.

Solution

  • Make sure your first network interface is NAT. The other second network interface can be anything you want when you're building box. Don't forget the Vagrant user, as discussed in the Google thread.

    Good luck.