Search code examples
c#nfcsmartcardrfid

ACR 122u NFC reader doesn't connect via USB: return error

Im developing a NFC reading system with C#, according to given sample codes with SDK I cannot connect the device with the application. Sometimes it return unknown error code (-2146434967) which is not handled in the sample application codes. enter image description here

But sometimes it return error code 6, which is a constant public const int SCARD_SPECIFIC = 6; and describe as 

/*===============================================================
    ' This value implies the card has been reset and specific 
    ' communication protocols have been established.
 '===============================================================*/

enter image description here

I don't know how to proceed, does somebody have any idea?

Thanks

Solution

  • Contacted ACS team member and found some answers.

    For the error 'retCode=6', please do the following steps:

    1. Go to Build->Configuration Manager

    2. Under 'Active solution platform', select 'New' (if x86 does not exists)

    3. Set 'Type or select the new platform:' to "x86"

    4. Set "Copy settings from:" to ""

    5. Check the 'Create new project platforms'

    6. Click 'OK' and rebuild the solution.

    For the error 'retCode=-2146434967', it means that the smart card has been removed on the reader.

    I've tried this with C#. Ive described on my blog : Simple NFC reading system for windows

    I used Mifare classic 1K Tags. Hope someone will take the advantage.

    Thanks