We have expend existing LUN size on EMC Storage and now i want to re-scan on Host side but i don't know how to figure out SCSI ID of that specific LUN. I am new to storage.. This is what i am doing but don't know whether it is a right way or not
Pseudo name=emcpowerj
CLARiiON ID=APM00112500570 [Oracle_Cluster]
Logical device ID=200601602E002900B6BCA114C9F8E011 [LUN01]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
2 qla2xxx sdaj SP A1 active alive 0 1
2 qla2xxx sdaw SP B1 active alive 0 4
1 qla2xxx sdj SP A0 active alive 0 1
1 qla2xxx sdw SP B0 active alive 0 4
Here i am running find command on sdX device to find out SCSI ID to i can do echo 1 > /sys/bus/scsi/drivers/X:X:X:X/rescan to do re-scan LUN
$ find /sys/devices -name "*block*" | grep -e "sdaj" -e "sdaw" -e "sdj" -e "sdw"
/sys/devices/pci0000:00/0000:00:09.0/0000:05:00.1/host2/rport-2:0-1/target2:0:1/**2:0:1:8**/block:sdaw
/sys/devices/pci0000:00/0000:00:09.0/0000:05:00.1/host2/rport-2:0-0/target2:0:0/**2:0:0:8**/block:sdaj
/sys/devices/pci0000:00/0000:00:09.0/0000:05:00.0/host1/rport-1:0-1/target1:0:1/**1:0:1:8**/block:sdw
/sys/devices/pci0000:00/0000:00:09.0/0000:05:00.0/host1/rport-1:0-0/target1:0:0/**1:0:0:8**/block:sdj
or there is a alternative or other way to scan LUN?
I like to use the "lsscsi" program, which is probably available for your distribution.
% lsscsi
[0:0:0:0] cd/dvd NECVMWar VMware IDE CDR00 1.00 /dev/sr0
[2:0:0:0] disk VMware, VMware Virtual S 1.0 /dev/sda
[2:0:1:0] disk VMware, VMware Virtual S 1.0 /dev/sdb
As for rescanning the bus, that's pretty much it.