I'm currently working on flashing SEandroid (security enhanced Android) onto a Nexus 7, but when I try to boot up, the Nexus 7 just flashes the Google screen and nothing else.
I successfully compiled the SEandroid Source code for both 4.2.1 and 4.1.2 and neither run on the Nexus.
Was wondering what some common errors could be for a device booting up, but the screen not showing anything?
I downloaded and compiled the code according to: http://selinuxproject.org/page/SEAndroid
I am using the tegra3_android_defconfig for my kernel and am using the full_grouper_userdebug.
Any help, even if not related to SEandroid would be helpful.
Here is an output from logcat:
--------- beginning of /dev/log/main
I/Netd ( 124): Netd 1.0 starting
W/InterfaceController( 124): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
I/installd( 130): installd firing up
I/DEBUG ( 125): debuggerd: Jun 12 2013 10:32:23
I/SurfaceFlinger( 126): SurfaceFlinger is starting
I/SurfaceFlinger( 126): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
E/libEGL ( 126): eglGetDisplay:121 error 300c (EGL_BAD_PARAMETER)
E/libEGL ( 126): eglInitialize:137 error 3008 (EGL_BAD_DISPLAY)
Thanks in advanced.
Rookie mistake. Forgot to add in Google's proprietary drivers for the Nexus 7.
Available here for who ever needs them!
https://developers.google.com/android/nexus/drivers
thanks all