I have several embedded machines listening and streaming rtp audio data to a multicast group. They are connected to a smart managed switch (Netgear GS108Ev2) which does basic igmp snooping and multicast filtering on its ports, so that the rest of my (W)LAN doesn't get flooded.
At start everything works fine for about 500-520 seconds. After that, they don't receive any more data until they leave and join the group again. I guess the switch is "forgetting" about the join after a timeout.
Is there any way to refresh the group membership, i.e. letting the switch know, that there ist still someone listening, without losing packets?
System info:
Arch: blackfin
# cat /proc/version
Linux version 2.6.28.10-ADI-2009R1-uCBF54x-EMM
(gcc version 4.3.3 (ADI) ) #158 PREEMPT Tue Jun 5 20:05:42 CEST 2012
This is the way multicast / the IGMP protocol works. A client has to join the group periodically by sending a Membership Report or it will be assumed that he has left the group after some short timeout. However, those reports are usually sent only when receiving a Membership Query from the local multicast router. Either your clients don't receive the query or don't respond with a report.
Try to use a tool like wireshark in order to see which IGMP packets are sent through your network.